Honeywell Technologies HSCMRRN002ND2A3 Piezoresistive Pressure SensorBoard 8 SMT

N° de stock RS:: 226-9689
Référence fabricant:: HSCMRRN002ND2A3
Fabricant:: Honeywell

Honeywell Technologies HSCMRRN002ND2A3 Piezoresistive Pressure SensorBoard 8 SMT

Sous-total (1 boîte de 50 unités)*

2 758,65 €

(TVA exclue)

3 337,95 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 100 unité(s) expédiée(s) à partir du 26 octobre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	55,173 €	2 758,65 €

*Prix donné à titre indicatif

N° de stock RS:: 226-9689
Référence fabricant:: HSCMRRN002ND2A3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Piezoresistive Pressure Sensor
	Maximum Overload Pressure	2.64kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	SMT
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	0.02 kPa
	Maximum Supply Voltage	5V
	Port Type	Dual Radial Barbed
	Accuracy	±0.25 %
	Maximum Operating Temperature	85°C
	Length	10mm
	Standards/Approvals	ISO 9001
	Height	13.75mm
	Series	HSC
	Width	13.3mm
	Minimum Operating Pressure	-2in/H2O
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Product Type Piezoresistive Pressure Sensor
	Maximum Overload Pressure 2.64kPa
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type SMT
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 0.02 kPa
	Maximum Supply Voltage 5V
	Port Type Dual Radial Barbed
	Accuracy ±0.25 %
	Maximum Operating Temperature 85°C
	Length 10mm
	Standards/Approvals ISO 9001
	Height 13.75mm
	Series HSC
	Width 13.3mm
	Minimum Operating Pressure -2in/H2O
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCMRRN002ND2A3

Honeywell HSC Series Piezoresistive Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCMRRN002ND2A3

This piezoresistive pressure sensor is a Compact board-mount transducer designed to measure absolute, gauge or differential pressure in non-corrosive, non-ionic gases and selected liquids. It provides a ratiometric analogue or digital output, is temperature-compensated and calibrated on-board, and is suitable for low-power systems operating from a 3.3-5V supply.

Features and Benefits:

• ±0.25%FSS BFSL accuracy reduces software compensation needs
• On-board ASIC provides temperature compensation and calibration
• Calibrated output update rates approximately 1kHz analogue and 2kHz digital
• Extremely low power consumption typically less than 10mW
• Optional internal diagnostics detect most internal failures
• Meets ISO9001 manufacturing standard for quality assurance

Applications

• Suitable for ventilators and respiratory machines
• Used with oxygen concentrators and anaesthesia equipment
• Ideal for HVAC transmitters and clogged filter detection
• Can be used for gas flow instrumentation and flow calibrators
• Suitable for blood analysis and kidney dialysis machines

What supply voltages does it accept?

It operates from a single supply of either 3.3V or 5.0V depending on the catalogue selection.

What pressure ranges are available for low-pressure measurement?

Low-pressure options cover ranges down to -2 inH2O and up through various mbar/Pa ranges depending on configuration.

What temperature conditions can it withstand during operation?

The device is characterised for operation from -20°C to 85°C with compensation typically specified over 0°C to 50°C.

How is the electrical Interface provided for digital outputs?

Digital versions offer SPI or I2C-compatible 14-bit outputs (min. 12-bit sensor resolution) with defined voltage-level thresholds.

Which fluids is it compatible with when the liquid option is selected?

Liquid media options permit use with non-corrosive, non-ionic fluids only and are limited to pressure ranges above specified minimums.