Honeywell Technologies HSCMRRD006MG2A3 Piezoresistive Pressure SensorBoard 8 SMT
- N° de stock RS:
- 226-9684
- Référence fabricant:
- HSCMRRD006MG2A3
- Fabricant:
- Honeywell Technologies
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 226-9684
- Référence fabricant:
- HSCMRRD006MG2A3
- Fabricant:
- Honeywell Technologies
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell Technologies | |
| Product Type | Piezoresistive Pressure Sensor | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Maximum Overload Pressure | 67.5kPa | |
| Mount Type | Board | |
| Package Type | SMT | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 0.6 kPa | |
| Port Type | Dual Radial Barbed | |
| Maximum Supply Voltage | 5V | |
| Accuracy | ±0.25 % | |
| Maximum Operating Temperature | 85°C | |
| Width | 13.3mm | |
| Height | 13.75mm | |
| Series | HSC | |
| Length | 10mm | |
| Standards/Approvals | ISO 9001 | |
| Minimum Operating Pressure | 0mbar | |
| Minimum Operating Temperature | -20°C | |
| Automotive Standard | ISO 9001 | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell Technologies | ||
Product Type Piezoresistive Pressure Sensor | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Maximum Overload Pressure 67.5kPa | ||
Mount Type Board | ||
Package Type SMT | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 0.6 kPa | ||
Port Type Dual Radial Barbed | ||
Maximum Supply Voltage 5V | ||
Accuracy ±0.25 % | ||
Maximum Operating Temperature 85°C | ||
Width 13.3mm | ||
Height 13.75mm | ||
Series HSC | ||
Length 10mm | ||
Standards/Approvals ISO 9001 | ||
Minimum Operating Pressure 0mbar | ||
Minimum Operating Temperature -20°C | ||
Automotive Standard ISO 9001 | ||
Honeywell HSC Series Piezoresistive Pressure Sensor, ±0.25% Accuracy, 0.6kPa Maximum Operating Pressure - HSCMRRD006MG2A3
This piezoresistive pressure sensor provides a calibrated, compensated output for measuring absolute, gage or differential pressures in board-mounted systems. It is designed for use with non-corrosive, non-ionic gases and offers ratiometric analogue or digital outputs while operating from a single 3.3V to 5V supply. The device is suited to Compact electronic assemblies where low power and high measurement fidelity across a standard temperature range are required.
Features and Benefits:
• ±0.25%FSS accuracy reduces software calibration overhead
• Calibrated output update rate up to 2kHz improves responsiveness
• Compensated over 0°C to 50°C for stable in-range performance
• Low power consumption under 10mW extends battery life
• Dual radial barbed port sensor option simplifies fluid connections
• 67.5kPa overload protection sensor supports occasional overpressure
• Calibrated output update rate up to 2kHz improves responsiveness
• Compensated over 0°C to 50°C for stable in-range performance
• Low power consumption under 10mW extends battery life
• Dual radial barbed port sensor option simplifies fluid connections
• 67.5kPa overload protection sensor supports occasional overpressure
Applications
• Suitable for ventilators and respiratory monitoring equipment
• Ideal for HVAC filter clogging and air-quality detection systems
• Used with laboratory gas-flow and chromatography analysers
• Can be used for portable airflow monitors and spirometers
• Suitable for industrial pneumatic control and flow calibration
• Ideal for HVAC filter clogging and air-quality detection systems
• Used with laboratory gas-flow and chromatography analysers
• Can be used for portable airflow monitors and spirometers
• Suitable for industrial pneumatic control and flow calibration
What supply voltages does it accept?
It operates from a single supply of either 3.3V or 5.0V.
How does the sensor handle temperature-related errors?
An on-board ASIC provides calibration and temperature compensation for offset, sensitivity and non-linearity within the compensated range.
What media are supported on the pressure ports?
It is intended for non-corrosive, non-ionic gases, liquid-media options exist for ranges ≥40mbar applied to Port1 only.
How fast is the device output for analogue and digital interfaces?
Calibrated output updates near 1kHz for analogue and approximately 2kHz for digital.
What environmental operating limits apply?
The operating temperature range extends from -20°C to 85°C and storage is rated to -40°C to 85°C.
Liens connexes
- Honeywell Technologies Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMAND001BAAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMRRV100MGAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMANV030PAAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMANV150PGAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMRRD010MDAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMANV015PAAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMRRN001ND2A3 Piezoresistive Pressure SensorSurface 8 SMT