Honeywell Technologies HSCDRRD006MDSA3 Pressure SensorBoard 8 DIP

N° de stock RS:: 226-9654
Référence fabricant:: HSCDRRD006MDSA3
Fabricant:: Honeywell

Honeywell Technologies HSCDRRD006MDSA3 Pressure SensorBoard 8 DIP

Sous-total (50 unités, dans une boîte de 50)*

2 261,80 €

(TVA exclue)

2 736,80 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	45,236 €	2 261,80 €

*Prix donné à titre indicatif

N° de stock RS:: 226-9654
Référence fabricant:: HSCDRRD006MDSA3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Pressure Sensor
	Maximum Overload Pressure	67.5kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	0.6 kPa
	Port Type	Dual Radial Barbed
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Series	HSC
	Length	10mm
	Height	13.75mm
	Standards/Approvals	ISO 9001
	Width	13.3mm
	Minimum Operating Pressure	-6mbar
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	Sélectionner tout
	Marque Honeywell
	Product Type Pressure Sensor
	Maximum Overload Pressure 67.5kPa
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 0.6 kPa
	Port Type Dual Radial Barbed
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Series HSC
	Length 10mm
	Height 13.75mm
	Standards/Approvals ISO 9001
	Width 13.3mm
	Minimum Operating Pressure -6mbar
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet - HSCDRRD006MDSA3

Honeywell HSC Series Piezoresistive Pressure Sensor, 0.6kPa Maximum Operating Pressure, ±0.25% Accuracy - HSCDRRD006MDSA3

This pressure sensor is a piezoresistive device designed for board-mount applications to measure absolute, gauge or differential pressures within a wide calibrated span. It provides either a ratiometric analogue output or a 12-14-bit digital output compatible with I2C or SPI, and is temperature characterised for use over a broad operating range in non‑corrosive gases and selected non‑ionic liquids when specified.

Features and Benefits:

• ±0.25% full scale accuracy minimises calibration overhead
• Temperature operation -20°C to +85°C extends deployment range
• On-board ASIC compensates and updates outputs at up to 2kHz
• Dual radial barbed ports simplify fluid connections on‑board
• DIP package supports straightforward through‑hole PCB mounting
• Very low power consumption reduces battery and thermal load

Applications

• Ideal for airflow monitoring in respiratory devices
• Suitable for HVAC filter-clog detection and VAV control
• Used with gas-flow instrumentation and chromatography systems
• Can be used for pressure sensing in oxygen concentrators
• Suitable for industrial barometry and flow calibrators

What supply voltages are supported?

The device operates from a single 3.3V or 5V supply.

Which media can be measured directly on the ports?

Non‑corrosive, non‑ionic gases, liquid media permitted on Port 1 for specified pressure ranges above 60 mbar with liquid‑option parts.

How does the sensor handle temperature variations?

On‑board calibration and temperature compensation correct offset, sensitivity and non‑linearity across the compensated temperature span.

What mounting and package options exist for PCB integration?

It is provided as a board‑mount DIP package with various port configurations including dual radial barbed ports.

What environmental and mechanical limits apply?

It is rated for operating temperatures from -20°C to 85°C and meets ISO 9001 manufacturing standards.