Honeywell Technologies Pressure SensorBoard 8 DIP

N° de stock RS:: 211-9927
Référence fabricant:: HSCDRRV001PGSA3
Fabricant:: Honeywell

Honeywell Technologies Pressure SensorBoard 8 DIP

Sous-total (1 boîte de 50 unités)*

1 956,45 €

(TVA exclue)

2 367,30 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	39,129 €	1 956,45 €

*Prix donné à titre indicatif

N° de stock RS:: 211-9927
Référence fabricant:: HSCDRRV001PGSA3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Pressure Sensor
	Sensor Type	Piezoresistive Pressure Sensor
	Maximum Overload Pressure	69kPa
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	6.89 kPa
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Operating Temperature	+85°C
	Standards/Approvals	ISO 9001
	Length	10mm
	Series	HSC
	Width	13.3mm
	Height	13.75mm
	Minimum Operating Pressure	0psi
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	Sélectionner tout
	Marque Honeywell
	Product Type Pressure Sensor
	Sensor Type Piezoresistive Pressure Sensor
	Maximum Overload Pressure 69kPa
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 6.89 kPa
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Operating Temperature +85°C
	Standards/Approvals ISO 9001
	Length 10mm
	Series HSC
	Width 13.3mm
	Height 13.75mm
	Minimum Operating Pressure 0psi
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet - HSCDRRV001PGSA3

Honeywell HSC Series Gauge Pressure Sensor, 3.3V Minimum Supply Voltage, ±0.25% Accuracy - HSCDRRV001PGSA3

This gauge pressure sensor is a board-mounted device designed to measure pressure relative to ambient conditions in low-pressure gas and compatible liquid applications. It provides a calibrated, temperature-compensated output for direct Interface to electronic systems and is intended for use where Compact size and precision are required in instrument and control assemblies.

Features and Benefits:

• ±0.25% accuracy pressure sensor delivers tight measurement precision
• 3.3V board-mounted pressure sensor supports low-voltage systems
• Dual radial barbed port sensor simplifies tubing connections
• DIP package pressure transducer eases through-hole PCB integration
• Low-pressure gauge sensor 69kPa overload increases safety margin
• -20 to 85°C operating pressure sensor suits wide thermal range

Applications

• Suitable for ventilator and respiratory monitoring devices
• Ideal for HVAC filter-clog detection and VAV control
• Used with gas flow instrumentation and flow calibrators
• Can be used in oxygen concentrators and anaesthesia machines
• Used for indoor Air quality and barometry measurements

What media is compatible with the sensor?

It is intended for non-corrosive, non-ionic gases and select non-corrosive, non-ionic liquids for ranges above 40 mbar.

How is output stability maintained over temperature?

On-board ASIC provides calibration and temperature compensation for offset, sensitivity, non-linearity and updates calibrated values at up to 1 kHz analogue.

What electrical interfaces are available?

The device supports a ratiometric analogue output, digital variants offer SPI or I2C-compatible 14-bit output with minimum 12-bit resolution.

How does the sensor perform under long-term use?

The design minimises drift through industry-leading stability characteristics and specifies long-term stability over extended cycle life.

What packaging and approvals apply to the product?

The sensor is supplied in a DIP package with dual radial barbed ports and is manufactured to ISO 9001 standards.