Honeywell SSCDANN015PG2A3 Gauge Pressure SensorSurface 8 DIP
- N° de stock RS:
- 211-9939
- Référence fabricant:
- SSCDANN015PG2A3
- Fabricant:
- Honeywell
Offre groupée disponible
Sous-total (1 unité)*
42,75 €
(TVA exclue)
51,73 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 80 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 42,75 € |
| 5 - 9 | 41,64 € |
| 10 - 24 | 40,57 € |
| 25 + | 39,54 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 211-9939
- Référence fabricant:
- SSCDANN015PG2A3
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Gauge Pressure Sensor | |
| Maximum Overload Pressure | 207kPa | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Mount Type | Surface | |
| Package Type | DIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 103 kPa | |
| Accuracy | ±0.25 % | |
| Maximum Supply Voltage | 5V | |
| Port Type | Single Axial Barbed | |
| Maximum Operating Temperature | 85°C | |
| Width | 13.5 mm | |
| Standards/Approvals | No | |
| Length | 10mm | |
| Height | 13.75mm | |
| Series | SSC | |
| Minimum Operating Pressure | 0psi | |
| Minimum Operating Temperature | -40°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Gauge Pressure Sensor | ||
Maximum Overload Pressure 207kPa | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Mount Type Surface | ||
Package Type DIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 103 kPa | ||
Accuracy ±0.25 % | ||
Maximum Supply Voltage 5V | ||
Port Type Single Axial Barbed | ||
Maximum Operating Temperature 85°C | ||
Width 13.5 mm | ||
Standards/Approvals No | ||
Length 10mm | ||
Height 13.75mm | ||
Series SSC | ||
Minimum Operating Pressure 0psi | ||
Minimum Operating Temperature -40°C | ||
Automotive Standard No | ||
The Honeywell TruStability Standard Accuracy Silicon Ceramic (SSC) Series is a piezo resistive silicon pressure sensor offering a ratio metric analogue or digital output for reading pressure over the specified full scale pressure span and temperature range. The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analogue and 2 kHz for digital.
Stability and reliability
Industry-leading accuracy of ±0.25 %FSS BFSL
Port and housing options simplify integration
Wide pressure range, from ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2O to ±150 psi
Small package size
Extremely low power consumption
Liens connexes
- Honeywell Gauge Pressure Sensor PCB Mount 207kPa Overload Max, DIP
- Honeywell Absolute Pressure Sensor PCB Mount 207kPa Overload Max, DIP
- Honeywell Gauge Pressure Sensor PCB Mount 1724kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 206kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 413kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor 6-Pin, DIP
- Honeywell Gauge Pressure Sensor PCB Mount 1724kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Surface Mount 206kPa Overload Max, SMT