Honeywell Technologies Pressure SensorBoard 8 DIP

N° de stock RS:: 211-9918
Référence fabricant:: HSCDLNN060MGAA5
Fabricant:: Honeywell

Honeywell Technologies Pressure SensorBoard 8 DIP

Sous-total (1 boîte de 50 unités)*

2 039,10 €

(TVA exclue)

2 467,30 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	40,782 €	2 039,10 €

*Prix donné à titre indicatif

N° de stock RS:: 211-9918
Référence fabricant:: HSCDLNN060MGAA5
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Maximum Overload Pressure	85kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	6000 kPa
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Port Type	Single Axial Barbless
	Maximum Operating Temperature	+85°C
	Height	13.75mm
	Length	10mm
	Width	13.3mm
	Standards/Approvals	ISO 9001
	Series	HSC
	Minimum Operating Pressure	0mbar
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Maximum Overload Pressure 85kPa
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 6000 kPa
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Port Type Single Axial Barbless
	Maximum Operating Temperature +85°C
	Height 13.75mm
	Length 10mm
	Width 13.3mm
	Standards/Approvals ISO 9001
	Series HSC
	Minimum Operating Pressure 0mbar
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDLNN060MGAA5

Honeywell HSC Series Gauge Pressure Sensor, 3.3V Minimum Supply Voltage, 6000kPa Maximum Operating Pressure - HSCDLNN060MGAA5

This gauge pressure sensor is a Compact board‑mount transducer designed to measure pressure referenced to atmosphere for non‑corrosive, non‑ionic gases. It provides a calibrated, temperature‑compensated output suitable for PCB integration and is intended for applications requiring low power consumption and high measurement consistency across varying temperatures and supply voltages.

Features and Benefits:

• ±0.25% accuracy gauge sensor reduces software calibration effort
• 3.3 to 5V supply pressure transducer supports common logic levels
• 8‑pin DIP pressure sensor enables straightforward through‑hole mounting
• single axial barbless port sensor simplifies tubing connection
• pressure sensor 85 kPa overload protection increases system safety
• high‑temperature gauge pressure sensor 85°C allows extended operating range

Applications

• Suitable for ventilators and respiratory machines in medical systems
• Ideal for HVAC transmitters and clogged‑filter detection in buildings
• Used with gas‑flow instrumentation and flow calibrators in labs
• Can be used for pneumatic controls and VAV control in industry
• Used for hospital room Air pressure monitoring and oxygen concentrators

What media can be applied to the sensor ports?

It is intended for non‑corrosive, non‑ionic gases and, for selected ranges, compatible non‑ionic liquids only on Port 1.

What supply voltages are supported and how is output scaled?

The device operates from a single 3.3V or 5.0V supply and provides a ratiometric output that scales with supply voltage.

How is temperature compensation handled and over what range?

On‑board calibration and temperature compensation are applied, devices are characterised over 0°C to 50°C and specified to operate beyond that.

What manufacturing standard applies to the product?

The sensor is designed and manufactured to ISO 9001 standard.

What packaging and mounting options are available for PCB integration?

It is supplied in a DIP package suitable for board mounting with an 8‑pin pin‑out.