Honeywell Technologies HSCDRRD002NDAA5 Pressure SensorBoard 8 DIP

N° de stock RS:: 214-1448
Référence fabricant:: HSCDRRD002NDAA5
Fabricant:: Honeywell

Honeywell Technologies HSCDRRD002NDAA5 Pressure SensorBoard 8 DIP

Sous-total (1 boîte de 50 unités)*

2 352,95 €

(TVA exclue)

2 847,05 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

Expédition à partir du 25 janvier 2027

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	47,059 €	2 352,95 €

*Prix donné à titre indicatif

N° de stock RS:: 214-1448
Référence fabricant:: HSCDRRD002NDAA5
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	2 in/H2O
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Width	13.3mm
	Series	HSC
	Height	13.75mm
	Length	10mm
	Standards/Approvals	ISO 9001
	Minimum Operating Pressure	-2in/H2O
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	Sélectionner tout
	Marque Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 2 in/H2O
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Width 13.3mm
	Series HSC
	Height 13.75mm
	Length 10mm
	Standards/Approvals ISO 9001
	Minimum Operating Pressure -2in/H2O
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet-HSCDRRD002NDAA5

Honeywell HSC Series Differential Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCDRRD002NDAA5

This differential pressure sensor measures the pressure difference between two ports for use with non-corrosive, non-ionic gases and selected liquids. It is a board-mount device offering ratiometric analogue or digital outputs and is temperature-compensated via an on-board ASIC to provide stable pressure readings across typical industrial and medical environments.

Features and Benefits:

• ±0.25% accuracy reduces software calibration requirements
• Operates from a single 3.3V supply for simple integration
• Calibrated output update rates up to 2kHz improve responsiveness
• Low power consumption typically less than 10mW extends battery life
• Dual radial barbed pressure port option simplifies tubing connection
• Wide compensated temperature range supports varied operating conditions

Applications

• Used for airflow monitoring in respiratory equipment
• Suitable for clog detection in HVAC filter systems
• Ideal for gas flow instrumentation and chromatography
• Can be used in ventilation control and VAV systems
• Useful for life sciences instrumentation and medical analysers

What electrical interfaces are available for the sensor?

It offers ratiometric analogue and 14-bit digital outputs compatible with I2C or SPI interfaces and provides direct microprocessor connection.

Which media can be measured and what are the restrictions?

Non-corrosive, non-ionic gases are supported, liquid-media options are available for Port 1 only on specified higher pressure ranges and require compatible fluids and particulate-free systems.

How does the product maintain accuracy across temperature?

An on-board ASIC performs calibration and temperature compensation for offset, sensitivity, non-linearity and thermal effects over the compensated temperature range.

What packaging and mounting styles are provided?

It is supplied in a DIP board-mount package with options including dual radial barbed ports and other port or fastener configurations for flexible PCB mounting.

What environmental and reliability characteristics are specified?

The sensor meets ISO 9001 quality standards, withstands industry-standard vibration and shock tests, and is rated for long life cycles with specified overpressure and burst limits.