Honeywell Technologies Pressure SensorBoard 8 DIP

N° de stock RS:: 211-9914
Numéro d'article Distrelec:: 304-56-873
Référence fabricant:: HSCDANN001BA2A3
Fabricant:: Honeywell

Honeywell Technologies Pressure SensorBoard 8 DIP

Sous-total (1 boîte de 50 unités)*

2 039,10 €

(TVA exclue)

2 467,30 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 50 unité(s) expédiée(s) à partir du 16 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	40,782 €	2 039,10 €

*Prix donné à titre indicatif

N° de stock RS:: 211-9914
Numéro d'article Distrelec:: 304-56-873
Référence fabricant:: HSCDANN001BA2A3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Maximum Overload Pressure	200kPa
	Product Type	Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	100 kPa
	Port Type	Single Axial Barbed
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Maximum Operating Temperature	+85°C
	Standards/Approvals	ISO 9001
	Length	10mm
	Series	HSC
	Height	13.75mm
	Width	13.3mm
	Minimum Operating Pressure	0bar
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Maximum Overload Pressure 200kPa
	Product Type Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 100 kPa
	Port Type Single Axial Barbed
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Maximum Operating Temperature +85°C
	Standards/Approvals ISO 9001
	Length 10mm
	Series HSC
	Height 13.75mm
	Width 13.3mm
	Minimum Operating Pressure 0bar
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDANN001BA2A3

Honeywell HSC Series Absolute Pressure Sensor, 100kPa Maximum Operating Pressure, ±0.25% Accuracy - HSCDANN001BA2A3

This absolute pressure sensor measures absolute pressure for board-mounted electronic systems and is intended for non-corrosive, non-ionic gases. It provides a calibrated, temperature-compensated ratiometric output for reading pressure across its operating span and is designed for PCB mount in automotive and industrial contexts.

Features and Benefits:

• ±0.25% accuracy reduces calibration software requirements
• Operates from low voltage 3.3 to 5V reducing power demands
• Calibrated output updates at 1kHz for Rapid readings
• Withstands 200kPa overload for robust overpressure tolerance
• Compensated over 0°C to 50°C for stable thermal performance
• Low typical power consumption <10mW extends battery life

Applications

• Suitable for airflow monitoring in respiratory equipment
• Ideal for pneumatic control and HVAC filter detection
• Used with gas flow instrumentation and chromatography systems
• Can be used in industrial barometry and flow calibration
• Suitable for automotive sensing where ISO 9001 applies

What environmental temperature range can it tolerate in operation?

The device functions across an operating range from -20°C to 85°C.

How is the electrical Interface presented for PCB integration?

An 8-pin DIP package provides standard pins for power, earth and output connections.

Which media are compatible with the pressure port?

It is intended for dry, non-corrosive, non-ionic gases, a liquid-media option exists for certain ranges above 40 mbar.

What diagnostic or output options are available?

Outputs include ratiometric analogue and 14-bit digital compatible with I2C or SPI protocols.

How does the sensor maintain measurement stability over time?

On-board ASIC performs offset and sensitivity calibration Plus temperature compensation to reduce long-term drift.