Honeywell Technologies HSCDRRV001PDSA3 Pressure SensorBoard 6 DIP

N° de stock RS:: 203-6348
Référence fabricant:: HSCDRRV001PDSA3
Fabricant:: Honeywell

Honeywell Technologies HSCDRRV001PDSA3 Pressure SensorBoard 6 DIP

Sous-total (1 paquet de 50 unités)*

1 252,50 €

(TVA exclue)

1 515,50 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

Expédition à partir du 22 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le paquet*
50 +	25,05 €	1 252,50 €

*Prix donné à titre indicatif

N° de stock RS:: 203-6348
Référence fabricant:: HSCDRRV001PDSA3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Pressure Sensor
	Maximum Overload Pressure	68.9kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	6
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	6.8 kPa
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Operating Temperature	+85°C
	Length	10mm
	Standards/Approvals	ISO 9001
	Width	13.3mm
	Series	HSC
	Height	13.75mm
	Minimum Operating Pressure	1psi
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Product Type Pressure Sensor
	Maximum Overload Pressure 68.9kPa
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 6
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 6.8 kPa
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Operating Temperature +85°C
	Length 10mm
	Standards/Approvals ISO 9001
	Width 13.3mm
	Series HSC
	Height 13.75mm
	Minimum Operating Pressure 1psi
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDRRV001PDatasheetA3

Pays d'origine :: CN

Honeywell HSC Series Differential Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCDRRV001PDSA3

This differential pressure sensor measures the pressure difference between two ports and provides a ratiometric analogue or digital output for use with non-corrosive, non-ionic gases. It is intended for board mounting and is temperature characterised for operation across typical industrial and medical conditions, offering fast update rates suitable for system-level monitoring and control.

Features and Benefits:

• ±0.25% accuracy reduces software correction needs
• Operates from a single 3.3V or 5V supply for flexibility
• Compensated over temperature to maintain output stability
• Low power consumption preserves battery life in portable systems
• Dual radial barbed port sensor simplifies tubing connections
• Calibrated on-board ASIC yields rapid, stable output updates

Applications

• Used for respiratory monitoring in ventilators and spirometers
• Suitable for HVAC filter clog detection and VAV control
• Ideal for gas flow instrumentation and flow calibrators
• Can be used for oxygen concentrator pressure sensing
• Used with anaesthesia machines and nebulisers in hospitals

What supply voltages will it accept?

It is characterised to operate from either 3.3V or 5V supply rails and is supplied as either a 3.3V or 5.0V device depending on the catalogue selection.

How does temperature affect performance?

The sensor is fully temperature compensated over the compensated range to limit offset and sensitivity drift and is characterised for operation from -20 to 85°C.

What media are compatible with the ports?

It is designed for non-corrosive, non-ionic gases, liquid-media options exist for Port 1 only on certain pressure ranges.

What outputs are available and how fast are they updated?

Outputs are available as ratiometric analogue or 14-bit digital (I2C or SPI compatible) with calibrated update rates around 1kHz analogue and 2kHz digital.

What mechanical package and pin count does it use?

The device is a board-mount DIP package with a 6-pin Interface for DIP versions and uses dual radial barbed ports for differential measurement.