SMC EX510 series Serial Interface
- N° de stock RS:
- 456-858
- Référence fabricant:
- EX510-DXP2
- Fabricant:
- SMC
Sous-total (1 unité)*
145,67 €
(TVA exclue)
176,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 145,67 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 456-858
- Référence fabricant:
- EX510-DXP2
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Product Type | Serial Interface | |
| Series | EX510 | |
| Number of Inputs | 3 | |
| Voltage | 24V | |
| Display Type | LED Indicator | |
| Hazardous Area Certification | No | |
| Number of Outputs | 4 | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | -10°C | |
| Standards/Approvals | UL, CSA, CE/UKCA | |
| Depth | 19.6mm | |
| Height | 31mm | |
| Width | 70mm | |
| Output Type | PNP | |
| Connection Type | M12 | |
| Suitable Medias | Air | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Product Type Serial Interface | ||
Series EX510 | ||
Number of Inputs 3 | ||
Voltage 24V | ||
Display Type LED Indicator | ||
Hazardous Area Certification No | ||
Number of Outputs 4 | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature -10°C | ||
Standards/Approvals UL, CSA, CE/UKCA | ||
Depth 19.6mm | ||
Height 31mm | ||
Width 70mm | ||
Output Type PNP | ||
Connection Type M12 | ||
Suitable Medias Air | ||
- Pays d'origine :
- JP
The SMC EX510 series 16 pnp sensor input block makes it possible to connect more valves and sensors than with conventional units. With the introduction of the EX510 series, only a power supply cable to the GW unit is required, resulting in wire-savings. Setting the address for the SI unit, output unit and input unit is no longer required, only the address for the GW unit needs to be set. The volume ratio of the EX510 SI unit is 60% more compact than the EX120.
RoHs compliant
Liens connexes
- SMC EX510 series Pneumatic Logic Controller
- SMC Fieldbus Interface Module EX510 PNP 24V
- SMC EX600 series Serial Interface
- SMC EX260 series Serial Interface
- SMC EX500 series Serial Interface
- SMC EX600 series 0.7 Mpa Serial Interface
- SMC EX250 series 1 Mpa Serial Interface
- SMC EX510 series 2 station Manifold for use with EX510 Series Gateway Units