SMC EX510 series Pneumatic Logic Controller
- N° de stock RS:
- 426-828
- Référence fabricant:
- EX510-DYP3
- Fabricant:
- SMC
Sous-total (1 unité)*
191,04 €
(TVA exclue)
231,16 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 24 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 191,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 426-828
- Référence fabricant:
- EX510-DYP3
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Product Type | Pneumatic Logic Controller | |
| Series | EX510 | |
| Number of Inputs | 3 | |
| Voltage | 24V | |
| Hazardous Area Certification | No | |
| Display Type | LED Indicator | |
| Number of Outputs | 4 | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | -10°C | |
| Depth | 19.6mm | |
| Height | 31mm | |
| Standards/Approvals | UL, CSA, CE/UKCA | |
| Width | 70mm | |
| Suitable Medias | Air | |
| Connection Type | M12 | |
| Output Type | PNP | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Product Type Pneumatic Logic Controller | ||
Series EX510 | ||
Number of Inputs 3 | ||
Voltage 24V | ||
Hazardous Area Certification No | ||
Display Type LED Indicator | ||
Number of Outputs 4 | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature -10°C | ||
Depth 19.6mm | ||
Height 31mm | ||
Standards/Approvals UL, CSA, CE/UKCA | ||
Width 70mm | ||
Suitable Medias Air | ||
Connection Type M12 | ||
Output Type PNP | ||
- Pays d'origine :
- JP
The SMC EX510 Output Unit series makes it possible to connect more valves and sensors than with conventional units. With the introduction of the EX510 series, only a power supply cable to the GW unit is required, resulting in wire-savings. Setting the address for the SI unit, output unit and input unit is no longer required, only the address for the GW unit needs to be set. The volume ratio of the EX510 SI unit is 60% more compact than the EX120.
Output units with a maximum of 16 output points
Cage clamp type terminal base which does not need to be screwed
Compliant to either NPN or PNP
Liens connexes
- SMC EX510 series Serial Interface
- SMC EX250 series Pneumatic Logic Controller
- SMC EX260 series Pneumatic Logic Controller
- SMC EX600 series Pneumatic Logic Controller
- SMC EX500 series Pneumatic Logic Controller
- SMC EX9 series Pneumatic Logic Controller
- SMC EX300 series Pneumatic Logic Controller
- SMC EX510 series 2 station Manifold for use with EX510 Series Gateway Units