SKF SYJ 50 TF Pillow Block Bearing -, 50 mm ID
- N° de stock RS:
- 213-2073
- Référence fabricant:
- SYJ 50 TF
- Fabricant:
- SKF
Sous-total (1 unité)*
90,82 €
(TVA exclue)
109,89 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 27 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 90,82 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2073
- Référence fabricant:
- SYJ 50 TF
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 50mm | |
| Product Type | Pillow Block Bearing | |
| Material | Steel | |
| Centre Height | 57.2mm | |
| Static Load Rating | 23.2kN | |
| Mount Hole Size | 20 mm | |
| Locking Type | Set Screw | |
| Length | 206mm | |
| Depth | 58mm | |
| Dynamic Load Rating | 35.1kN | |
| Mount Hole Centre-to-Centre | 157.5mm | |
| End Type | Open | |
| Number of Bolts | 2 | |
| Bore Type | Cylindrical | |
| Series | SYJ | |
| Standards/Approvals | No | |
| Height | 114mm | |
| Limiting Speed | 4000rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 50mm | ||
Product Type Pillow Block Bearing | ||
Material Steel | ||
Centre Height 57.2mm | ||
Static Load Rating 23.2kN | ||
Mount Hole Size 20 mm | ||
Locking Type Set Screw | ||
Length 206mm | ||
Depth 58mm | ||
Dynamic Load Rating 35.1kN | ||
Mount Hole Centre-to-Centre 157.5mm | ||
End Type Open | ||
Number of Bolts 2 | ||
Bore Type Cylindrical | ||
Series SYJ | ||
Standards/Approvals No | ||
Height 114mm | ||
Limiting Speed 4000rpm | ||
- Pays d'origine :
- IT
SKF Pillow Block Bearing, 50mm Shaft Diameter, 114mm Overall Height - SYJ 50 TF
Seeking a simple way to mount a rotating rod in your industrial system? Turn to this pillow block bearing from SKF. Its extended inner ring means you don't need additional washers or spacers to mount your shaft, so you can get your equipment set up and spinning in a snap. There are two pre-drilled holes in the base that let you securely bolt the unit onto a flat surface, so it won't come loose when things get shaky. A static load rating of 23.2kN and a dynamic load rating of 35.1kN mean it'll bear up under heavy loads.
Features & Benefits
• Limiting speed of 4000rpm for use in high-speed applications
• Cast iron housing is resistant to impact and corrosion
• Sealed, pre-lubricated bearing to cut down on maintenance needs
• Supports movement in constant and alternating directions for versatile use
Applications
• Conveyors
• Construction plants
• Packaging industry
How do I mount a shaft in this unit?
After sliding your shaft through the central hole, you can lock it in position by tightening the set screw on the inner ring for a speedy set-up.
Liens connexes
- SKF SYJ 90 TF Pillow Block Bearing -, 90 mm ID
- SKF SYJ 75 TF Pillow Block Bearing -, 75 mm ID
- SKF SYJ 45 TF Pillow Block Bearing -, 45 mm ID
- SKF SYJ 60 TF Pillow Block Bearing -, 60 mm ID
- SKF SYJ 40 TF Pillow Block Bearing -, 40 mm ID
- SKF SYJ 35 TF Pillow Block Bearing -, 35 mm ID
- SKF SYF 50 TF Pillow Block Bearing -, 50 mm ID
- SKF SYJ 20 TF Plummer Block House -, 20 mm ID