SKF SYJ 75 TF Pillow Block Bearing -, 75 mm ID
- N° de stock RS:
- 213-2078
- Référence fabricant:
- SYJ 75 TF
- Fabricant:
- SKF
Sous-total (1 unité)*
339,80 €
(TVA exclue)
411,16 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 12 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 339,80 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2078
- Référence fabricant:
- SYJ 75 TF
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 75mm | |
| Product Type | Pillow Block Bearing | |
| Material | Steel | |
| Static Load Rating | 49kN | |
| Centre Height | 82.5mm | |
| Locking Type | Set Screw | |
| Mount Hole Size | 25 mm | |
| Length | 275mm | |
| Dynamic Load Rating | 66.3kN | |
| Depth | 74mm | |
| End Type | Open | |
| Mount Hole Centre-to-Centre | 217mm | |
| Number of Bolts | 2 | |
| Height | 165.5mm | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Series | SYJ | |
| Limiting Speed | 2600rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 75mm | ||
Product Type Pillow Block Bearing | ||
Material Steel | ||
Static Load Rating 49kN | ||
Centre Height 82.5mm | ||
Locking Type Set Screw | ||
Mount Hole Size 25 mm | ||
Length 275mm | ||
Dynamic Load Rating 66.3kN | ||
Depth 74mm | ||
End Type Open | ||
Mount Hole Centre-to-Centre 217mm | ||
Number of Bolts 2 | ||
Height 165.5mm | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Series SYJ | ||
Limiting Speed 2600rpm | ||
- Pays d'origine :
- IT
SKF Pillow Block Bearing, Short Base Design, Deep-Groove Insert Bearing Type, 75mm ID, 82.5mm Centre Height - SYJ 75 TF
Using this pillow block bearing from SKF lets you maintain a firm hold on a revolving machine shaft. Made up of an insert bearing in a housing, it keeps the outer ring steady while the inner ring moves. As the insert is based on a sealed deep-groove bearing, it's ideal for applications that constantly rotate and alter position. A handy relubrication hole makes it quick and easy to top up grease and cut friction out of the equation.
Features & Benefits
• Inner ring extends on both sides to accommodate mounting from either direction
• Contact sealing and flingers on both sides help prevent contamination
• Basic dynamic load rating of 66.3kN to balance heavy loads in moving applications
• Two bolt holes on the base make it easy to mount to a flat surface
• Pre-lubricated for reduced risk of friction
Applications
• Transmission systems
• Medical technology
• Steel mills
• Material handling
What's this bearing made from?
The insert of this bearing is made from rugged steel, which is resistant to corrosion for reliable use in humid settings. The housing is made from tough cast iron that stands up to repeated impacts.
Liens connexes
- SKF SYJ 45 TF Pillow Block Bearing -, 45 mm ID
- SKF SYJ 60 TF Pillow Block Bearing -, 60 mm ID
- SKF SYJ 40 TF Pillow Block Bearing -, 40 mm ID
- SKF SYJ 50 TF Pillow Block Bearing -, 50 mm ID
- SKF SYJ 35 TF Pillow Block Bearing -, 35 mm ID
- SKF SYJ 90 TF Pillow Block Bearing -, 90 mm ID
- SKF SYJ 70 TF Plummer Block House -, 70 mm ID
- SKF SYJ 20 TF Plummer Block House -, 20 mm ID