SKF SYF 50 TF Pillow Block Bearing -, 50 mm ID
- N° de stock RS:
- 213-2067
- Référence fabricant:
- SYF 50 TF
- Fabricant:
- SKF
Sous-total (1 unité)*
126,42 €
(TVA exclue)
152,97 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 126,42 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2067
- Référence fabricant:
- SYF 50 TF
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 50mm | |
| Product Type | Pillow Block Bearing | |
| Material | Steel | |
| Static Load Rating | 23.2kN | |
| Centre Height | 57.2mm | |
| Locking Type | Set Screw | |
| Length | 135mm | |
| Depth | 54mm | |
| Dynamic Load Rating | 35.1kN | |
| End Type | Open | |
| Mount Hole Centre-to-Centre | 101.6mm | |
| Number of Bolts | 2 | |
| Bore Type | Cylindrical | |
| Height | 114mm | |
| Series | SYF | |
| Standards/Approvals | No | |
| Limiting Speed | 4000rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 50mm | ||
Product Type Pillow Block Bearing | ||
Material Steel | ||
Static Load Rating 23.2kN | ||
Centre Height 57.2mm | ||
Locking Type Set Screw | ||
Length 135mm | ||
Depth 54mm | ||
Dynamic Load Rating 35.1kN | ||
End Type Open | ||
Mount Hole Centre-to-Centre 101.6mm | ||
Number of Bolts 2 | ||
Bore Type Cylindrical | ||
Height 114mm | ||
Series SYF | ||
Standards/Approvals No | ||
Limiting Speed 4000rpm | ||
- Pays d'origine :
- IT
The SKF SY design short base pillow block ball bearing units consist of an insert bearing mounted in a housing which can be bolted to support surface. The insert bearing unit has 50mm inside diameter and 135mm overall length. It is based on sealed deep groove ball bearings in the 62 and 63 series but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.
Can withstand sufficient torque as per the industry standards for mounting purposes
Availability of appropriate seals and end covers
Dimensions are as per the suitable application as prescribed by the manufacturer
Uses Bearing Steel as material
Has a cylindrical type bore
Liens connexes
- SKF SYF 35 TF Pillow Block Bearing -, 35 mm ID
- SKF SYF 25 TF Pillow Block Bearing -, 25 mm ID
- SKF SYF 30 TF Pillow Block Bearing -, 30 mm ID
- SKF SYF 20 TF Pillow Block Bearing -, 20 mm ID
- SKF SYF 45 TF Pillow Block Bearing -, 45 mm ID
- SKF SYF 40 TF Pillow Block Bearing -, 40 mm ID
- SKF SYJ 50 TF Pillow Block Bearing -, 50 mm ID
- SKF SYF 25 FM Pillow Block Bearing -, 25 mm ID