RS PRO Nitrile Rubber (NBR) O-Ring Cord, 5.33 mm Diameter, 8.5 m Length
- N° de stock RS:
- 138-1607
- Numéro d'article Distrelec:
- 304-16-959
- Fabricant:
- RS PRO
Offre groupée disponible
Sous-total (1 bobine de 1 unité)*
20,91 €
(TVA exclue)
25,30 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 25 unité(s) prête(s) à être expédiée(s)
- Plus 44 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine |
|---|---|
| 1 - 4 | 20,91 € |
| 5 - 9 | 20,48 € |
| 10 + | 20,06 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 138-1607
- Numéro d'article Distrelec:
- 304-16-959
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | O-Ring Cord | |
| Diameter | 5.33 mm | |
| Material | Nitrile Rubber (NBR) | |
| Length | 8.5m | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type O-Ring Cord | ||
Diameter 5.33 mm | ||
Material Nitrile Rubber (NBR) | ||
Length 8.5m | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
- Pays d'origine :
- GB
RS PRO Nitrile Rubber O-Ring Cord, 5.33 mm Diameter, 8.5 m Long
Replace washer seals and gaskets with this O-ring cord from RS PRO. The long length of this cord means you can use it multiple times to carry out repairs on a large number of seals.
This O-ring cord is a useful substitute rubber on any static seal, allowing you to repair components rather than replace them. It's made from nitrile rubber, a hard-wearing material that's oil-resistant. This means it won't degrade and will last a long time, even when exposed to machinery grease and lubrication. This product complies with the Restriction of Hazardous Substances (RoHS) directives, so you can be sure that it contains only negligible amounts of any harmful materials. Thanks to its non-corrosive properties, this O-ring cord is suitable for use as a seal in fuel hoses, as it won't disintegrate on contact with hydraulic fluids or petrol.
Features and Benefits
Liens connexes
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length
- RS PRO Nitrile Rubber O-Ring Cord 8.5m Length