Fluke Multifunction Tester 1000V, 50 V Earth Resistance Measurement With USB, ISOCAL
- N° de stock RS:
- 647-546
- Référence fabricant:
- FLUKE-1673FC UK/FPC
- Fabricant:
- Fluke
Sous-total (1 unité)*
2 650,00 €
(TVA exclue)
3 206,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 650,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 647-546
- Référence fabricant:
- FLUKE-1673FC UK/FPC
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Multifunction Tester | |
| Loop Impedance Test Type | 2 Wire, 3 Wire, Phase to Earth, Phase to Neutral | |
| Automatic RCD Test | Yes | |
| RCD Ramp Test | Yes | |
| Non-Tripping | Yes | |
| Insulation Test Voltage | 1000, 50V | |
| Maximum Voltage Measurement | 600V | |
| Earth Resistance Measurement | Yes | |
| Downloadable Data | Yes | |
| Interface Type | USB | |
| Continuity Test Current | 1mA | |
| Width | 141.9mm | |
| Standards/Approvals | IEC 610102034, IEC/EN 610101, IEC 610102030 | |
| Height | 119.3mm | |
| Remote Switch Mode | Yes | |
| Length | 2625000mm | |
| Weight | 1.6kg | |
| IP Rating | IP40 | |
| Safety Category Voltage | 600V | |
| Safety Category Level | CAT III 600 V CAT IV 300 V | |
| Display Type | Touch Screen | |
| Power Source | Lithium-ion Battery | |
| Calibrated | ISOCAL | |
| Battery Type | Lithium-ion | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Multifunction Tester | ||
Loop Impedance Test Type 2 Wire, 3 Wire, Phase to Earth, Phase to Neutral | ||
Automatic RCD Test Yes | ||
RCD Ramp Test Yes | ||
Non-Tripping Yes | ||
Insulation Test Voltage 1000, 50V | ||
Maximum Voltage Measurement 600V | ||
Earth Resistance Measurement Yes | ||
Downloadable Data Yes | ||
Interface Type USB | ||
Continuity Test Current 1mA | ||
Width 141.9mm | ||
Standards/Approvals IEC 610102034, IEC/EN 610101, IEC 610102030 | ||
Height 119.3mm | ||
Remote Switch Mode Yes | ||
Length 2625000mm | ||
Weight 1.6kg | ||
IP Rating IP40 | ||
Safety Category Voltage 600V | ||
Safety Category Level CAT III 600 V CAT IV 300 V | ||
Display Type Touch Screen | ||
Power Source Lithium-ion Battery | ||
Calibrated ISOCAL | ||
Battery Type Lithium-ion | ||
Statut RoHS : Exempté
- Pays d'origine :
- RO
Fluke Multifunction Tester, 600V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLUKE-1673FC UK/FPC
This multifunction tester is a portable instrument for electrical installation verification, designed to assess insulation, continuity, loop impedance and earth resistance in live and isolated systems. It operates from a rechargeable lithium‑ion battery and features a touch‑screen interface for interactive measurement selection. The unit supports data transfer via USB and conforms to recognised IEC safety standards for professional on‑site testing.
Features and Benefits:
• Insulation test voltages 1000V and 50V for varied insulation checks
• Continuity at 1mA for testing sensitive protective devices
• Loop impedance measurements 2‑wire, 3‑wire, phase to earth for fault localisation
• RCD ramp test and automatic RCD test for precise trip characterisation
• Maximum voltage measurement up to 600V for system verification
• Safety category CAT III 600V and CAT IV 300V for high‑voltage environments
• Continuity at 1mA for testing sensitive protective devices
• Loop impedance measurements 2‑wire, 3‑wire, phase to earth for fault localisation
• RCD ramp test and automatic RCD test for precise trip characterisation
• Maximum voltage measurement up to 600V for system verification
• Safety category CAT III 600V and CAT IV 300V for high‑voltage environments
Applications
• Suitable for domestic and commercial installation verification routines
• Ideal for RCD performance assessment and commissioning tests
• Used for periodic inspection regimes requiring insulation testing
• Can be used for fault finding with loop impedance and continuity checks
• Used with portable datalogging systems via USB download capability
• Ideal for RCD performance assessment and commissioning tests
• Used for periodic inspection regimes requiring insulation testing
• Can be used for fault finding with loop impedance and continuity checks
• Used with portable datalogging systems via USB download capability
How is the instrument powered and how long is field runtime?
It runs from an internal lithium‑ion battery which supports multiple sequential tests and can be recharged between site visits.
Which protection ratings and standards apply to the unit?
The instrument meets the IEC 61010 family of standards and carries an IP40 ingress rating for controlled indoor use.
Can the tester record and export measurement data?
Yes, measured results are downloadable over a USB interface for reporting and archiving.
Does the tester prevent nuisance tripping during tests?
It includes a non‑tripping continuity mode to verify continuity without actuating RCDs or protective devices.
Liens connexes
- Fluke Multifunction Tester 1000V ISOCAL
- Fluke Multifunction Tester 1000V RSCAL
- Fluke Multifunction Tester 1000V UKAS
- Fluke Multifunction Tester 1000V DKDCAL
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB, RSCAL
- Fluke 1672 Multifunction Tester 1000V Earth Resistance Measurement With USB, UKAS
- Fluke FLUKE-1673 FC Multifunction Tester 500V Earth Resistance Measurement With USB Type C