ROHM BD16938AEFV-CE2, Brushed DC Motor Motor Driver IC 28-Pin, HTSSOP-B
- N° de stock RS:
- 235-2560
- Référence fabricant:
- BD16938AEFV-CE2
- Fabricant:
- ROHM
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 235-2560
- Référence fabricant:
- BD16938AEFV-CE2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Motor Type | Brushed DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | SD Card | |
| Mount Type | Surface | |
| Package Type | HTSSOP-B | |
| Pin Count | 28 | |
| Output Current | 1A | |
| Minimum Supply Voltage | 6.3V | |
| Maximum Supply Voltage | 40V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Series | BD16938AEF | |
| Height | 1mm | |
| Width | 4.5mm | |
| Standards/Approvals | No | |
| Length | 10.05mm | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Motor Type Brushed DC Motor | ||
Product Type Motor Driver IC | ||
Configuration SD Card | ||
Mount Type Surface | ||
Package Type HTSSOP-B | ||
Pin Count 28 | ||
Output Current 1A | ||
Minimum Supply Voltage 6.3V | ||
Maximum Supply Voltage 40V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Series BD16938AEF | ||
Height 1mm | ||
Width 4.5mm | ||
Standards/Approvals No | ||
Length 10.05mm | ||
Automotive Standard AEC-Q100 | ||
The ROHM 8 channel half bridge driver for automotive applications. It can drive Compact DC brush motors directly and each output can be controlled in three modes. MCU can control the driver via 16 bit serial peripheral interface. The absolute voltage is 40 V rated with low ON resistance packaged in Compact package, which contributes to realize high reliability, low energy consumption and low cost.
AEC-Q100 qualified
Low standby current
Built-in protection diode against output reverse voltage
Over current protection at VS supply stage
Under load detection at VS supply stage
Over voltage protection with OVDSEL mode at VS supply stage
Under voltage lock out at VS supply stage
Thermal shutdown
Thermal warning