ROHM BD6385EFV-E2, Stepper Motor Driver IC 40-Pin, HTSSOP
- N° de stock RS:
- 171-6969
- Référence fabricant:
- BD6385EFV-E2
- Fabricant:
- ROHM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 171-6969
- Référence fabricant:
- BD6385EFV-E2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Motor Type | Stepper | |
| Product Type | Motor Driver IC | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | HTSSOP | |
| Pin Count | 40 | |
| Output Current | 1.5A | |
| Maximum Supply Voltage | 28V | |
| Minimum Supply Voltage | 10V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 75°C | |
| Height | 1mm | |
| Standards/Approvals | No | |
| Length | 13.5mm | |
| Series | BD6385EFV | |
| Width | 5.5mm | |
| Inverter Power Rating | 4.7W | |
| Supply Current | 10mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Motor Type Stepper | ||
Product Type Motor Driver IC | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type HTSSOP | ||
Pin Count 40 | ||
Output Current 1.5A | ||
Maximum Supply Voltage 28V | ||
Minimum Supply Voltage 10V | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 75°C | ||
Height 1mm | ||
Standards/Approvals No | ||
Length 13.5mm | ||
Series BD6385EFV | ||
Width 5.5mm | ||
Inverter Power Rating 4.7W | ||
Supply Current 10mA | ||
Automotive Standard No | ||
- Pays d'origine :
- JP
This series is the high-grade type that provides the highest function and highest reliance in the ROHM stepping motor driver series. This series has the perfect various protection circuits and reduces IC's generation of heat by adopting low-ON resistance DMOS and high heat-radiation power package. As for its basic function, it is a low power consumption bipolar PWM constant current-drive driver with power supply's rated voltage of 36V and rated output current of 1.0A to 2.2A.
Low on-resistance DMOS, rated output current 1.5A
CLK-IN/PARALLEL-IN drive
QUARTER STEP
Applicable to the μSTEP drive
Power-saving function
TSD(Thermal Shutdown) circuit
OCP(Over Current Protection) circuit
UVLO(Under Voltage Locked Out) circuit
OVLO(Under Voltage Locked Out) circuit
Power ON reset function
Compact, thin-shape, and high heat dissipation package
Current decay mode selection(Mix decay)
One power supply system 36V