Honeywell Surface Hall Effect Sensor 1.65 V 5.5V, SOT-23, 3-Pin
- N° de stock RS:
- 236-2723
- Référence fabricant:
- SM353LT
- Fabricant:
- Honeywell
Sous-total (1 bobine de 3000 unités)*
2 220,00 €
(TVA exclue)
2 700,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 09 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,74 € | 2 220,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 236-2723
- Référence fabricant:
- SM353LT
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Position Sensor | |
| Technology | Digital | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 1.65V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Standards/Approvals | RoHS | |
| Height | 1.4mm | |
| Series | Nanopower | |
| Length | 2.9mm | |
| Supply Current | 360nA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Hall Effect Sensor | ||
Sensor Type Position Sensor | ||
Technology Digital | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 1.65V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Standards/Approvals RoHS | ||
Height 1.4mm | ||
Series Nanopower | ||
Length 2.9mm | ||
Supply Current 360nA | ||
Automotive Standard No | ||
- Pays d'origine :
- CN
The Honeywell Nanopower series magneto resistive (MR) sensor ICs are ultra-sensitive device designed to accommodate a wide range of applications with large Air gaps, small magnetic field and low power requirements. The sensor ICs respond to either a north or south pole applied in a direction parallel to the sensor. They do not require the magnet polarity to be identified, simplifying installation and potentially reducing system cost. The sensor ICs use a very low average current consumption and a push-pull output which does not require a pull-up resistor. The sensor ICs can operate from a supply voltage as low as 1.65 V, promoting energy efficiency.
Temperature range -40 °C to 85 °C
Non-chopper stabilized design
High sensitivity
Liens connexes
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5V 3-Pin
- Honeywell Surface Hall Effect Sensor 1.65 V 5.5V SOT-23, 3-Pin
- Texas Instruments Surface Hall Effect Sensor 1.65 V 5.5V 3-Pin
- Honeywell Surface Hall Effect Sensor 2.2 V 5.5V 3-Pin
- Honeywell Surface Hall Effect Sensor 2.7 V 6.5V 3-Pin
- Honeywell Surface Hall Effect Sensor 3 V 26V 3-Pin
- Honeywell Surface Hall Effect Sensor 3 V 24V 3-Pin
- Honeywell Surface Hall Effect Sensor 4.5 V 24V 3-Pin