ABB Monitoring Relay, DPDT, DIN Rail, 24 V dc 24/240 V ac
- N° de stock RS:
- 876-5049
- Référence fabricant:
- 1SVR740712R1200 CM-MSS.41P
- Fabricant:
- ABB
Sous-total (1 unité)*
178,57 €
(TVA exclue)
216,07 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 2 unité(s) expédiée(s) à partir du 28 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 178,57 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 876-5049
- Référence fabricant:
- 1SVR740712R1200 CM-MSS.41P
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Product Type | Monitoring Relay | |
| Sub Type | PTC | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Terminal Type | Push-in | |
| IP Rating | IP20, IP50 | |
| Supply DC Voltage | 24 V dc | |
| Contact Current | 3.7mA | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 60°C | |
| Height | 85.6mm | |
| Length | 103.7mm | |
| Standards/Approvals | No | |
| Series | CM-MSS | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Product Type Monitoring Relay | ||
Sub Type PTC | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Terminal Type Push-in | ||
IP Rating IP20, IP50 | ||
Supply DC Voltage 24 V dc | ||
Contact Current 3.7mA | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 60°C | ||
Height 85.6mm | ||
Length 103.7mm | ||
Standards/Approvals No | ||
Series CM-MSS | ||
CM-MSS Series Thermistor Motor Protection Relays
Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance
The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:
Main features include:
Dynamic interrupted wire detection
Wide control supply voltage range for this series 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available
Single Sensor Input Version
Wire Break Detection
Approvals
Some products also have the ATEX approval for the use in hazardous areas.
Liens connexes
- ABB Monitoring Relay DIN Rail, 24 V dc 24/240 V ac
- ABB Monitoring Relay DPDT 240 V ac 240 V dc
- ABB Monitoring Relay DIN Rail, 24 V dc 24 V ac
- ABB Monitoring Relay DPDT 24 V dc 110/130 V ac, 220/240 V ac
- ABB Monitoring Relay DPDT 24 V dc 220/240 V ac, 110/130 V ac
- ABB Monitoring Relay DIN Rail, 24 V dc 24/240 V ac
- ABB Monitoring Relay DPDT 500 V ac
- ABB Monitoring Relay DPDT 240 V ac 240 V dc