ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 24 V dc 110V ac, 130 V ac, 220 V ac, 240 V ac
- N° de stock RS:
- 876-5042
- Référence fabricant:
- 1SVR740712R2200 CM-MSS.33P
- Fabricant:
- ABB
Sous-total (1 unité)*
105,60 €
(TVA exclue)
127,78 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 14 septembre 2026
- Plus 6 unité(s) expédiée(s) à partir du 14 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 105,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 876-5042
- Référence fabricant:
- 1SVR740712R2200 CM-MSS.33P
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Application | Temperature | |
| Product Type | Monitoring Relay | |
| Sub Type | PTC | |
| Electrical Phase | 1 | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Terminal Type | Push-in | |
| IP Rating | IP20, IP50 | |
| Contact Current | 3.7A | |
| Supply DC Voltage | 24 V dc | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Length | 103.7mm | |
| Series | CM-MSS | |
| Height | 85.6mm | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Application Temperature | ||
Product Type Monitoring Relay | ||
Sub Type PTC | ||
Electrical Phase 1 | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Terminal Type Push-in | ||
IP Rating IP20, IP50 | ||
Contact Current 3.7A | ||
Supply DC Voltage 24 V dc | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Length 103.7mm | ||
Series CM-MSS | ||
Height 85.6mm | ||
CM-MSS Series Thermistor Motor Protection Relays
Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance
The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:
Main features include:
Dynamic interrupted wire detection
Wide control supply voltage range for this series 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available
Single Sensor Input Version
Wire Break Detection
Approvals
Some products also have the ATEX approval for the use in hazardous areas.
Liens connexes
- ABB Monitoring Relay DPDT 24 V dc 110V ac 220 V ac, 240 V ac
- ABB Monitoring Relay SPDT 24 V dc 110V ac 220 V ac, 240 V ac
- ABB Monitoring Relay DIN Rail 240 V ac
- Eaton Monitoring Relay 110V ac 220 V ac, 240 V ac
- ABB Monitoring Relay DIN Rail, 24 V dc 24V ac
- Schneider Electric Monitoring Relay DPDT 110V ac, 240 V ac
- Eaton Monitoring Relay DIN Rail 130 V ac 240 V ac
- Schneider Electric Monitoring Relay DIN Rail 110V ac, 130 V ac