Références fabricant

ABB Temperature Monitoring Relay, SPDT, DIN Rail

N° de stock RS:: 876-4985
Référence fabricant:: 1SVR730720R1400 CM-MSS.11S
Fabricant:: ABB

ABB Temperature Monitoring Relay, SPDT, DIN Rail

Voir la catégorie

Sous-total (1 unité)*

125,34 €

(TVA exclue)

151,66 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

Plus 11 unité(s) expédiée(s) à partir du 15 décembre 2025

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	125,34 €

*Prix donné à titre indicatif

N° de stock RS:: 876-4985
Référence fabricant:: 1SVR730720R1400 CM-MSS.11S
Fabricant:: ABB

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	ABB
	Monitoring Application	Temperature
	Contact Configuration	SPDT
	Mounting Type	DIN Rail
	Time Delay	<100ms
	Temperature Sensitivity	Overtemperature, Winding Temperature
	Hazardous Area Certification	ATEX
	Series	CM-MSS
	Standards Met	UL
	Special Features	Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Manual & Automatic Reset, Non-Volatile Fault Storage, One Measuring Circuit, Over Heating Protection, Over Load Protection, Remote Reset, Short-Circuit Monitoring of the Sensor Circuit
	Terminal Type	Screw
	Minimum Operating Temperature	-25°C
	Length	103.7mm
	Width	22.5mm
	Maximum Operating Temperature	+60°C
	Height	85.6mm
	Operating Temperature Range	-25 → +60°C
	Minimum Voltage Sensed	24V dc
	Current Range	Maximum of 3.7mA
	Maximum Voltage Sensed	240V dc
	Dimensions	103.7 x 22.5 x 85.6mm

	Sélectionner tout
	Marque ABB
	Monitoring Application Temperature
	Contact Configuration SPDT
	Mounting Type DIN Rail
	Time Delay <100ms
	Temperature Sensitivity Overtemperature, Winding Temperature
	Hazardous Area Certification ATEX
	Series CM-MSS
	Standards Met UL
	Special Features Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Manual & Automatic Reset, Non-Volatile Fault Storage, One Measuring Circuit, Over Heating Protection, Over Load Protection, Remote Reset, Short-Circuit Monitoring of the Sensor Circuit
	Terminal Type Screw
	Minimum Operating Temperature -25°C
	Length 103.7mm
	Width 22.5mm
	Maximum Operating Temperature +60°C
	Height 85.6mm
	Operating Temperature Range -25 → +60°C
	Minimum Voltage Sensed 24V dc
	Current Range Maximum of 3.7mA
	Maximum Voltage Sensed 240V dc
	Dimensions 103.7 x 22.5 x 85.6mm

ABB Monitoring Relay, Overtemperature Monitoring, Screw Terminals - CM-MSS Series - 1SVR730720R1400 CM-MSS.11S

Make sure your equipment doesn't lose its cool with this monitoring relay from ABB. Its built-in thermistor monitors thermal energy build-up in your system and steps in to prevent overheating. As it also protects against short circuits and detects broken wires, this device is an all-rounder that minimises the risk of damage to your machinery. Screw terminals make it a cinch to wire up using a screwdriver, so you're not driven round the twist during set-up.

Features & Benefits

• Snaps onto a DIN rail for ease of installation
• Broad operating temperature range between -25°C and +60°C for use in harsh industrial environments
• Compact dimensions of 103.7 (L) x 22.5 (W) x 85.6mm (H) to fit in space-tight areas
• Mechanical lifespan of 30 million cycles for long-lasting performance
• Housing has an IP50 rating that indicates some protection from dust

Applications

• Construction industry
• Industrial automation
• Factory power supplies

Can I use this device in explosive environments?

Yes, this item is safe for use in explosive atmospheres, so you can use it in volatile workspaces.