Broyce Control Monitoring Relay, SPDT, DIN Rail, 100V ac, 230 V ac
- N° de stock RS:
- 188-3543
- Référence fabricant:
- LTMR 100-230V AC/DC
- Fabricant:
- Broyce Control
Sous-total (1 unité)*
59,48 €
(TVA exclue)
71,97 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 17 août 2026
- Plus 10 unité(s) expédiée(s) à partir du 28 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 59,48 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-3543
- Référence fabricant:
- LTMR 100-230V AC/DC
- Fabricant:
- Broyce Control
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broyce Control | |
| Product Type | Monitoring Relay | |
| Contact Configuration | SPDT | |
| Mount Type | DIN Rail | |
| Power Consumption | 1VA | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Time Delay | 0.5 s | |
| Contact Current | 5A | |
| Minimum Operating Temperature | -20°C | |
| Supply AC Voltage | 100, 230V ac | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | CMS, CE, RoHS, IEC, EMC | |
| Width | 17.5mm | |
| Length | 66.5mm | |
| Height | 89mm | |
| Series | L | |
| Sélectionner tout | ||
|---|---|---|
Marque Broyce Control | ||
Product Type Monitoring Relay | ||
Contact Configuration SPDT | ||
Mount Type DIN Rail | ||
Power Consumption 1VA | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Time Delay 0.5 s | ||
Contact Current 5A | ||
Minimum Operating Temperature -20°C | ||
Supply AC Voltage 100, 230V ac | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals CMS, CE, RoHS, IEC, EMC | ||
Width 17.5mm | ||
Length 66.5mm | ||
Height 89mm | ||
Series L | ||
- Pays d'origine :
- GB
The product is used in conjunction with an external PTC thermistor which are typically embedded in motors. It will monitor the resistance of the thermistor and if this increases above the fixed threshold (due to an increase in measured temperature), the relay will de-energize. The resistance must decrease below the “release” threshold before the relay re-energizes again.
Over Temperature detection
Used in conjunction with PTC thermistors
Auto-resetting
Isolated Auxiliary Supply
SPDT Relay output
17.5mm wide, DIN Rail mount
Liens connexes
- Broyce Control Monitoring Relay DIN Rail 230 V ac 100 to 230 V dc
- Broyce Control Monitoring Relay DIN Rail 230 V ac 100 to 230 V dc
- Broyce Control Monitoring Relay 230 V ac Monitor Range DIN Rail, 230V ac
- Broyce Control Monitoring Relay SPDT 230V ac
- Broyce Control Monitoring Relay 230/400 V ac Monitor Range DIN Rail, 230V ac 25 V ac
- Broyce Control Monitoring Relay SPDT 230V ac 25 V ac
- Broyce Control Monitoring Relay 24/230 V ac Monitor Range DIN Rail, 230V ac 25 V ac
- Tele Monitoring Relay DIN Rail 230 V ac