Broyce Control Monitoring Relay, 2SPNO, DIN Rail, 100V ac, 230 V ac 100 → 230 V dc
- N° de stock RS:
- 188-3545
- Référence fabricant:
- LR44/2 100-230V AC/DC
- Fabricant:
- Broyce Control
Sous-total (1 unité)*
61,37 €
(TVA exclue)
74,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 24 unité(s) expédiée(s) à partir du 17 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 61,37 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-3545
- Référence fabricant:
- LR44/2 100-230V AC/DC
- Fabricant:
- Broyce Control
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broyce Control | |
| Product Type | Monitoring Relay | |
| Application | Voltage | |
| Contact Configuration | 2SPNO | |
| Mount Type | DIN Rail | |
| Power Consumption | 3VA | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Time Delay | 1 s | |
| Supply AC Voltage | 100V ac, 230V ac | |
| Contact Current | 5A | |
| Minimum Operating Temperature | +60°C | |
| Supply DC Voltage | 100 → 230 V dc | |
| Maximum Operating Temperature | 60°C | |
| Series | 44 | |
| Width | 44mm | |
| Standards/Approvals | IEC, RoHS, CE | |
| Length | 63.5mm | |
| Height | 85mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Broyce Control | ||
Product Type Monitoring Relay | ||
Application Voltage | ||
Contact Configuration 2SPNO | ||
Mount Type DIN Rail | ||
Power Consumption 3VA | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Time Delay 1 s | ||
Supply AC Voltage 100V ac, 230V ac | ||
Contact Current 5A | ||
Minimum Operating Temperature +60°C | ||
Supply DC Voltage 100 → 230 V dc | ||
Maximum Operating Temperature 60°C | ||
Series 44 | ||
Width 44mm | ||
Standards/Approvals IEC, RoHS, CE | ||
Length 63.5mm | ||
Height 85mm | ||
- Pays d'origine :
- GB
The product is designed to monitor the status of the externally wired contacts and operate/alternate the output relays in turn on each closure of the contact. A help function is included such that it allows the second relay to energize (after a short delay) when the other contact is closed. An auxiliary supply (required to power the unit) must be present for the product to function.
Logic Relay designed to balance wear between motors, compressors and generators
Monitors 2 external N.O. contacts
Built in Help function
Isolated Auxiliary supply
2 x SPNO Relay outputs
44mm wide, DIN Rail mount
Liens connexes
- Broyce Control Monitoring Relay DIN Rail 230 V ac 100 → 230 V dc
- Broyce Control Monitoring Relay DIN Rail 230 V ac
- Broyce Control Monitoring Relay DIN Rail 85 → 265 V dc
- Broyce Control Monitoring Relay 230 V ac Monitor Range DIN Rail, 230V ac
- Siemens Monitoring Relay 100V ac, 230 V ac
- Broyce Control Monitoring Relay 230/400 V ac Monitor Range DIN Rail, 230V ac 25 V ac
- Siemens Monitoring Relay 250 V dc 230 V ac
- Siemens Monitoring Relay 24 → 250 V dc 230 V ac
