Références fabricant

Broyce Control Voltage Monitoring Relay, 1 Phase, SPDT, Maximum of 315 V, DIN Rail

N° de stock RS:: 135-6187
Référence fabricant:: LCVR/2 230V
Fabricant:: Broyce Control

Broyce Control Voltage Monitoring Relay, 1 Phase, SPDT, Maximum of 315 V, DIN Rail

Sous-total (1 unité)*

104,34 €

(TVA exclue)

126,25 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

14 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	104,34 €

*Prix donné à titre indicatif

N° de stock RS:: 135-6187
Référence fabricant:: LCVR/2 230V
Fabricant:: Broyce Control

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Broyce Control
	Monitoring Application	Voltage
	Electrical Phase	1
	Contact Configuration	SPDT
	Voltage Sensing Range	Maximum of 315 V
	Voltage Sensitivity	Overvoltage, Undervoltage
	Mounting Type	DIN Rail
	Phase Sensitivity	Single Phase
	Time Delay	0.2 → 10s
	Frequency Sensing Range	48 → 63Hz
	Series	L
	Operating Temperature Range	+60°C
	Dimensions	66.5 x 17.5 x 89mm
	Length	66.5mm
	Maximum Operating Temperature	+60°C
	Width	17.5mm
	Height	89mm
	Minimum Operating Temperature	-20°C
	Terminal Type	Screw
	Maximum Voltage Sensed	315V
	Number of Poles	2
	Special Features	Microprocessor Based, Monitors Own Supply And Detects If The Set Under Or Over Voltage Trip Levels Are Exceeded, Adjustments For Under And Over Voltage Trip Levels, Adjustment For Time Delay, Green Led Indication For Supply Status

	Sélectionner tout
	Marque Broyce Control
	Monitoring Application Voltage
	Electrical Phase 1
	Contact Configuration SPDT
	Voltage Sensing Range Maximum of 315 V
	Voltage Sensitivity Overvoltage, Undervoltage
	Mounting Type DIN Rail
	Phase Sensitivity Single Phase
	Time Delay 0.2 → 10s
	Frequency Sensing Range 48 → 63Hz
	Series L
	Operating Temperature Range +60°C
	Dimensions 66.5 x 17.5 x 89mm
	Length 66.5mm
	Maximum Operating Temperature +60°C
	Width 17.5mm
	Height 89mm
	Minimum Operating Temperature -20°C
	Terminal Type Screw
	Maximum Voltage Sensed 315V
	Number of Poles 2
	Special Features Microprocessor Based, Monitors Own Supply And Detects If The Set Under Or Over Voltage Trip Levels Are Exceeded, Adjustments For Under And Over Voltage Trip Levels, Adjustment For Time Delay, Green Led Indication For Supply Status

Pays d'origine :: GB

LCVR/2 Under and Over Voltage plus Time Delay

Broyce Controls L-Series signal conditioners use a QR barcode marking method allowing direct access to all technical data sheets, ensuring correct information is always at your finger tips!

Features and Benefits

Compact 17.5 mm DIN Rail housing

Microprocessor based

True R.M.S. monitoring

Selectable nominal voltages to suit most popular single phase supply voltages

Monitors own supply and detects if the set Under or Over voltage trip levels are exceeded

Adjustments for Under and Over voltage trip levels

Adjustment for time delay

Independent relay outputs - Under voltage monitoring / Over voltage monitoring

2 x SPDT relay output 5A

Green LED indication for supply status

Red LED relay status indication

Approvals

UL Certification

Broyce Monitor Relays

Relay controllers manufactured using flame retardant material to UL94 VO
Electrical life: ≥150 000 operations
Suitable for use within ambient temperature environments from -20 to +60°C (except stock no. 361-1710 and 361-1681 which are suitable from -20 to +50°C)

Note

Output relay contact rating specified at 250Vac