Dold Monitoring Relay, DPDT, DIN Rail, 230V ac 24 V dc
- N° de stock RS:
- 181-2789
- Référence fabricant:
- MK9055N.38/500
- Fabricant:
- Dold
Sous-total (1 unité)*
264,40 €
(TVA exclue)
319,92 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 264,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 181-2789
- Référence fabricant:
- MK9055N.38/500
- Fabricant:
- Dold
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dold | |
| Product Type | Monitoring Relay | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Power Consumption | 4VA | |
| Terminal Type | Screw | |
| Time Delay | 0 to 50 s | |
| IP Rating | IP20, IP40 | |
| Contact Current | 3A | |
| Supply AC Voltage | 230V ac | |
| Minimum Operating Temperature | -20°C | |
| Supply DC Voltage | 24 V dc | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | CE, RoHS | |
| Width | 22.5mm | |
| Series | MK9055N | |
| Height | 90mm | |
| Length | 97mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dold | ||
Product Type Monitoring Relay | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Power Consumption 4VA | ||
Terminal Type Screw | ||
Time Delay 0 to 50 s | ||
IP Rating IP20, IP40 | ||
Contact Current 3A | ||
Supply AC Voltage 230V ac | ||
Minimum Operating Temperature -20°C | ||
Supply DC Voltage 24 V dc | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals CE, RoHS | ||
Width 22.5mm | ||
Series MK9055N | ||
Height 90mm | ||
Length 97mm | ||
- Pays d'origine :
- DE
Monitoring of 2 frequency levels (e.g. underspeed / standstill and overspeed)
Separate relay outputs for under- and overfrequency (1 or 2 c/o contacts each)
As alternative window operating mode (monitoring of a speed range)
Response value for over- and underspeed / frequency separately adjustable in 10 ranges 1 ... 120.000 IPM or 0,15 ... 20.000 Hz
Most fast reaction time also at low speed by time period measurement of the input frequency
As option with input for NAMUR-sensors with sensor and wire protection against interruption and short circuit
Programmable via terminals:
Start up time delay 0 ... 50 s or controllable
Alarm delay time of 0 or 0.5 s
With manual reset or auto reset
LED-indication for auxiliary voltage, measuring input and output relay, additional LED for indication of wire- / sensor failure at NAMUR-input
Auxiliary voltages AC 230 V and DC 24 V in one unit
MH 9055 with wide input range for auxiliary voltage
AC/DC 24 ... 60 V or AC/DC 110 ... 230 V (only 2 x 1 C/O)
As option with analogue output, proportionally to speed
2 possible contacts
MK 9055N/5_ _ 2 x 1 changeover contacts
MH 9055/5_ _: 2 x 2 hangeover contacts or wide range aux. voltage
2 possible compact designs
MK 9055N/5_ _: Width 22,5 mm
MH 9055/5_ _: Width 45 mm
Liens connexes
- Dold Monitoring Relay DIN Rail, 230V ac 24 V dc
- Dold Monitoring Relay DIN Rail, 24 V dc
- Dold Monitoring Relay 3 Phase DIN Rail 230V ac
- Dold Monitoring Relay DIN Rail 230V ac
- Dold Monitoring Relay DIN Rail, 10mA to 10A
- Dold Monitoring Relay DIN Rail 230 V ac
- Dold Monitoring Relay DPDT 1mA to 10A 230V ac
- Dold Monitoring Relay DPDT 15mA to 50mA 230V ac