Dold Monitoring Relay, 1, 3 Phase, DPDT, DIN Rail, 24 V dc, 230V ac
- N° de stock RS:
- 240-8844
- Référence fabricant:
- BD5936.17 AC50/60Hz 230V
- Fabricant:
- Dold
Sous-total (1 unité)*
394,35 €
(TVA exclue)
477,16 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 4 unité(s) expédiée(s) à partir du 27 avril 2026
- Plus 4 unité(s) expédiée(s) à partir du 08 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 394,35 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-8844
- Référence fabricant:
- BD5936.17 AC50/60Hz 230V
- Fabricant:
- Dold
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dold | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1, 3 | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Power Consumption | 3VA | |
| Terminal Type | Plus-Minus Terminal Screws | |
| IP Rating | IP40, IP20 | |
| Minimum Operating Temperature | -15°C | |
| Supply DC Voltage | 24 V dc | |
| Supply AC Voltage | 230V ac | |
| Maximum Operating Temperature | 55°C | |
| Series | BD 5936 | |
| Standards/Approvals | IEC/EN 60255-1, IEC/EN 60255-26, CE, CCC | |
| Height | 74mm | |
| Width | 45mm | |
| Length | 121mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dold | ||
Product Type Monitoring Relay | ||
Electrical Phase 1, 3 | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Power Consumption 3VA | ||
Terminal Type Plus-Minus Terminal Screws | ||
IP Rating IP40, IP20 | ||
Minimum Operating Temperature -15°C | ||
Supply DC Voltage 24 V dc | ||
Supply AC Voltage 230V ac | ||
Maximum Operating Temperature 55°C | ||
Series BD 5936 | ||
Standards/Approvals IEC/EN 60255-1, IEC/EN 60255-26, CE, CCC | ||
Height 74mm | ||
Width 45mm | ||
Length 121mm | ||
- Pays d'origine :
- DE
BD5936.17 - Standstill monitor
Wire breakage detection in the measurement circuit
Positively driven output contacts: 2 NO, 2 NC for 250 Vac
LED displays for motor standstill, wire breakage and operating voltage
Overall width 45 mm
Standstill recognition for 3-phase and single-phase asynchronous motors, e.g. for safety door lock releases on machine tools or for activating parking brakes.
The BD5936.17 measures the induced voltage of the slowing motor at two terminals on the stator winding. No initiator etc. is necessary. Frequency converter-driven motors cannot be monitored with these devices due to the leakage currents from their power semiconductors.
Rotation Sensing
All units have standard panel cut out of 45 x 45mm and SPCO output
Liens connexes
- Dold Monitoring Relay DIN Rail 230 V ac
- Dold Monitoring Relay DIN Rail, 24 V dc
- Dold Monitoring Relay DPDT, DIN Rail
- Dold Monitoring Relay DPDT 400 V ac, 230 V
- Dold Monitoring Relay DIN Rail 230 V ac
- Dold Monitoring Relay DIN Rail
- Dold Monitoring Relay DIN Rail
- Dold Monitoring Relay DPDT 230 V ac, 400 V ac