Dold Monitoring Relay, DPDT, DIN Rail, 230V ac 24 V dc
- N° de stock RS:
- 181-2788
- Référence fabricant:
- MK9055N.12 1-120.000IPM UH=AC230V+DC24V
- Fabricant:
- Dold
Sous-total (1 unité)*
264,40 €
(TVA exclue)
319,92 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 264,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 181-2788
- Référence fabricant:
- MK9055N.12 1-120.000IPM UH=AC230V+DC24V
- Fabricant:
- Dold
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dold | |
| Product Type | Monitoring Relay | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Power Consumption | 4VA | |
| Terminal Type | Screw | |
| Time Delay | 0 to 100 s | |
| IP Rating | IP40, IP20 | |
| Supply AC Voltage | 230V ac | |
| Minimum Operating Temperature | -20°C | |
| Contact Current | 3A | |
| Supply DC Voltage | 24 V dc | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | RoHS, CE | |
| Width | 22.5mm | |
| Series | MK9055N | |
| Height | 90mm | |
| Length | 97mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dold | ||
Product Type Monitoring Relay | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Power Consumption 4VA | ||
Terminal Type Screw | ||
Time Delay 0 to 100 s | ||
IP Rating IP40, IP20 | ||
Supply AC Voltage 230V ac | ||
Minimum Operating Temperature -20°C | ||
Contact Current 3A | ||
Supply DC Voltage 24 V dc | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals RoHS, CE | ||
Width 22.5mm | ||
Series MK9055N | ||
Height 90mm | ||
Length 97mm | ||
Detection of high or low-rpm / stand still (adjustable function)
Large setting range 1 ... 120.000 IPM or 0.15 ... 20.000 Hz (10 ranges each)
As option with input for NAMUR-sensors with sensor and wire protection against interruption and short circuit
Adjustable hysteresis 0.5 ... 50 %
Adjustable start up time delay 0 ... 50 s, control with external contact
Adjustable monitoring time for missing input signal at function over frequency, additional using as standstill level
Programmable via terminals:
Alarm delay of 0 ... 100 s
with manual reset or auto reset
LED-indication for auxiliary voltage, measuring input and output relay, additional LED for indication of wire- / sensor failure at NAMUR-input
Auxiliary voltages AC 230 V and DC 24 V in one unit
2 changeover contacts, closed circuit operation
Open circuit operation on request
As option with analogue output, proportionally to speed
Device available with 2 response values and separately controlled output relays for under- and over frequency see
MK 9055N/5_ _
MH 9055 with wide input range for auxiliary voltage (AC/DC 24 ... 60 V or AC/DC 110 ... 230 V)
Liens connexes
- Dold Monitoring Relay DIN Rail
- Dold Monitoring Relay DIN Rail, 230 V ac 24 V dc
- Dold Monitoring Relay DIN Rail 24 115 V ac, 230 V ac
- Dold Monitoring Relay DIN Rail 115 V ac, 230 V ac
- Dold Monitoring Relay 0.7 to 1.3 UN Monitor Range DIN Rail 80 to 230 V dc
- Dold Monitoring Relay DIN Rail 12 V dc, 230 V ac
- Dold Monitoring Relay DPDT 0.1A to 10A, 230 V ac
- Dold Monitoring Relay DIN Rail, 230 V ac