Dold Monitoring Relay, SPDT, DIN Rail, 100mA to 10A, 12 V dc, 230V ac
- N° de stock RS:
- 426-870
- Référence fabricant:
- MH9398.11 AC12-230V UH=AC230V AC10A
- Fabricant:
- Dold
Sous-total (1 unité)*
414,79 €
(TVA exclue)
501,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 414,79 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 426-870
- Référence fabricant:
- MH9398.11 AC12-230V UH=AC230V AC10A
- Fabricant:
- Dold
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dold | |
| Product Type | Monitoring Relay | |
| Contact Configuration | SPDT | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 100mA | |
| Switching Voltage | 230V ac | |
| Maximum Current Sensed | 10A | |
| Power Consumption | 2.5kW | |
| Current Sensitivity | 10 A | |
| IP Rating | IP20, IP40 | |
| Minimum Operating Temperature | -20°C | |
| Supply DC Voltage | 12 V dc | |
| Supply AC Voltage | 230V ac | |
| Relay Contact Current | 3A | |
| Maximum Operating Temperature | 60°C | |
| Length | 97mm | |
| Standards/Approvals | IEC/EN 61 000-4-6, RoHS, IEC 60664-1, IEC/EN 61000-4-2, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61 000-4-5 | |
| Height | 90mm | |
| Width | 45mm | |
| Series | MH9398 | |
| Sélectionner tout | ||
|---|---|---|
Marque Dold | ||
Product Type Monitoring Relay | ||
Contact Configuration SPDT | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 100mA | ||
Switching Voltage 230V ac | ||
Maximum Current Sensed 10A | ||
Power Consumption 2.5kW | ||
Current Sensitivity 10 A | ||
IP Rating IP20, IP40 | ||
Minimum Operating Temperature -20°C | ||
Supply DC Voltage 12 V dc | ||
Supply AC Voltage 230V ac | ||
Relay Contact Current 3A | ||
Maximum Operating Temperature 60°C | ||
Length 97mm | ||
Standards/Approvals IEC/EN 61 000-4-6, RoHS, IEC 60664-1, IEC/EN 61000-4-2, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61 000-4-5 | ||
Height 90mm | ||
Width 45mm | ||
Series MH9398 | ||
- Pays d'origine :
- DE
The Dold active power transducer MH 9398 of the VARIMETER-family monitors reliably the effective power of single phase electric consumers. Adjustment is simply done via 2 rotary switches. When exceeding the adjusted threshold the output relay switches. In addition the unit has 2 galvanic separated analogue outputs. These provide the momentary active power value. LEDs indicate the connected supply and the state of the output relay.
Universal use because of relay- and analogue outputs
Reliability overload detection by active power measuring
To extend the life of your electric drives
Preventive maintenance
Quicker fault locating
Liens connexes
- Dold Monitoring Relay SPDT 100mA to 12A 230 V ac
- Dold Monitoring Relay DIN Rail, 230 V ac 24 V dc
- Dold Monitoring Relay 3 Phase DIN Rail
- Dold Monitoring Relay 1 Phase DIN Rail
- Dold Monitoring Relay DPDT 0.1A to 10A, 230 V ac
- Dold Monitoring Relay DIN Rail 220 V dc
- Dold Monitoring Relay DIN Rail, 10mA to 10A
- Dold Monitoring Relay 0.7 to 1.3 UN Monitor Range DIN Rail 80 to 230 V dc