Omron Monitoring Relay, 3 Phase, SPST, DIN Rail, Screw
- N° de stock RS:
- 111-3125
- Référence fabricant:
- K8DT-LS1TA
- Fabricant:
- Omron
Sous-total (1 unité)*
75,55 €
(TVA exclue)
91,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 14 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 75,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 111-3125
- Référence fabricant:
- K8DT-LS1TA
- Fabricant:
- Omron
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 3 | |
| Contact Configuration | SPST | |
| Mount Type | DIN Rail, Screw | |
| Terminal Type | Push-in | |
| Time Delay | 0.1 to 10 s | |
| IP Rating | IP20 | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Series | K8DT-LS | |
| Width | 17.5mm | |
| Standards/Approvals | Korean Radio Waves Act (Act 10564), CCC:GB14048.5, EN 61010-1, EN 61326-1, UL 61010-1 | |
| Height | 90mm | |
| Length | 90mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Product Type Monitoring Relay | ||
Electrical Phase 3 | ||
Contact Configuration SPST | ||
Mount Type DIN Rail, Screw | ||
Terminal Type Push-in | ||
Time Delay 0.1 to 10 s | ||
IP Rating IP20 | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Series K8DT-LS | ||
Width 17.5mm | ||
Standards/Approvals Korean Radio Waves Act (Act 10564), CCC:GB14048.5, EN 61010-1, EN 61326-1, UL 61010-1 | ||
Height 90mm | ||
Length 90mm | ||
K8DT-LS Monitoring Water Level Controls Relays.
• Downsize control panels.
• Reduced wiring.
• Front setting switches.
• Detects errors in Motors and other equipment via current changes.
• Use in either over current or under current mode.
• Function as an alarm.
• Set threshold values.
• Alarm output can be set as a relay or transistor output.
• Input signal – Voltage, current, water level electrode and temperature (thermocouple or platinum resistance thermometer) can be input.
• Sensitivity adjustment and timer.
• Lower power consumption.
• Side by side mounting is possible.
• Long term contact reliability.
• Reliable in poor noise environments.
• Slim profile 17.5 mm
K8DT-LS1TA 100 to 240 VAC Model.
• Conductive Level Monitoring Relay Controller.
• Single phase.
• Transistor Output.
• Power supply 100 to 240 V ac.
• Response time 0.1 s to 10 s (variable).
• Current capacity 10 A (per pole).
Features and Benefits.
• Power supply 100 to 240 V ac, 50/60 Hz, 24 V dc
• Green LED Power (PWR)
• Yellow LED output (OUT)
• One SPDT contact relay.
• DIN Rail Mounted or Screw Mounted.
• Excellent for water level control.
• Number of insertions 50 times
• Weight 100 g
• Case material PC, UL 94 V-0.
• Colour N1.5
• Protection IP20 (terminals)
What is a Monitoring / Measuring Relay?
A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.
Types of Monitoring Relays Available?
• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current
K8DT-LS Conductive Level Controller
Omron K8DT-LS conductive level controllers are Ideal for water level control. Offering sensitivity adjustment and an ON-delay timer that is ideal as a countermeasure for waves on liquid surfaces.
Sensitivity adjustment from 10 k to 100 kΩ.
Easy onsite adjustment
ON-delay timer from 0.1 to 10 s.
Width of 17.5 mm to reduce space required in panels.
Push-In Plus Terminal that reduce wiring work.
Double-insertion holes for crossover wiring (all terminals).
Omron K8DT Series Control Relays
Omron K8DT measuring and monitoring relays are part of the Value Design for Panel concept that takes control panel design and manufacturing to a new level. The K8DT series protect important equipment from damage using various measuring and monitoring relays that conform to international safety standards. Low power consumption and low heat generation design offer a long service life.
Space Saving
The K8DT series can help downsize control panels by reducing the width between wiring ducts and void panel space. The slim body allows space to mount more devices in the same size of control panel to increase control panel functionality.
Push-In Plus Terminals
Push-In Plus terminal blocks on all K8DT relays reduce the time and work involved in wiring. The Push-In Plus terminals allow solid and stranded wires with pin terminals or ferrules to be inserted without the need for tools.
Standards
EN 61010-1, EN 61326-1, UL 31010-1, IP 20 Terminals