Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 0.1A to 5A, 0V ac
- N° de stock RS:
- 111-3093
- Référence fabricant:
- K8DT-AS2TA
- Fabricant:
- Omron
Sous-total (1 unité)*
118,07 €
(TVA exclue)
142,86 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 17 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 118,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 111-3093
- Référence fabricant:
- K8DT-AS2TA
- Fabricant:
- Omron
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | SPST | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 0.1A | |
| Power Consumption | 2.5VA | |
| Maximum Current Sensed | 5A | |
| Current Sensitivity | Overcurrent, Undercurrent | |
| Terminal Type | Push-in | |
| Time Delay | 250 ms | |
| IP Rating | IP20 | |
| Minimum Operating Temperature | -20°C | |
| Supply AC Voltage | 0V ac | |
| Relay Contact Current | 0.1, 5A | |
| Maximum Operating Temperature | 60°C | |
| Series | K8DT-AS | |
| Standards/Approvals | RoHS, EN 60947-5-1, UL 60947-5-1 | |
| Length | 90mm | |
| Height | 90mm | |
| Width | 17.5mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration SPST | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 0.1A | ||
Power Consumption 2.5VA | ||
Maximum Current Sensed 5A | ||
Current Sensitivity Overcurrent, Undercurrent | ||
Terminal Type Push-in | ||
Time Delay 250 ms | ||
IP Rating IP20 | ||
Minimum Operating Temperature -20°C | ||
Supply AC Voltage 0V ac | ||
Relay Contact Current 0.1, 5A | ||
Maximum Operating Temperature 60°C | ||
Series K8DT-AS | ||
Standards/Approvals RoHS, EN 60947-5-1, UL 60947-5-1 | ||
Length 90mm | ||
Height 90mm | ||
Width 17.5mm | ||
- Pays d'origine :
- CN
Omron K8DT-AS Series Monitoring Relay, 5A Maximum Current Sensed, 0.1A Minimum Current Sensed - K8DT-AS2TA
This monitoring relay detects and responds to abnormal single‑phase current conditions, providing protection against both overcurrent and undercurrent scenarios in industrial control systems. It is engineered for DIN‑rail installation and integrates with automation and electrical setups to monitor load continuity and trigger control circuits when measured current falls outside set thresholds.
Features and Benefits:
• Sensitivity range 0.1A to 5A providing precise current detection
• Single‑pole single‑throw contact offering straightforward switching action
• 250ms time delay preventing nuisance trips from short transients
• Push‑in terminals enabling Rapid tool‑free wiring connections
• Low power draw of 2.5VA reducing supply loading during operation
• IP20 enclosure suitable for standard protected electrical cabinets
• Single‑pole single‑throw contact offering straightforward switching action
• 250ms time delay preventing nuisance trips from short transients
• Push‑in terminals enabling Rapid tool‑free wiring connections
• Low power draw of 2.5VA reducing supply loading during operation
• IP20 enclosure suitable for standard protected electrical cabinets
Applications
• Suitable for motor load supervision to flag underload conditions
• Ideal for pump systems to detect dry‑run or overload situations
• Used with control panels to monitor branch circuit currents
• Can be used for conveyor systems to indicate stall or overload
• Suitable for factory automation where a Compact footprint is required
• Ideal for pump systems to detect dry‑run or overload situations
• Used with control panels to monitor branch circuit currents
• Can be used for conveyor systems to indicate stall or overload
• Suitable for factory automation where a Compact footprint is required
What mounting method does it require?
It clips onto a DIN rail for standard control‑cabinet installation and retention.
What electrical phase is monitored?
It monitors a single electrical phase for current surveillance tasks.
What Terminal type is provided for field wiring?
Push‑in terminals accept conductors for quick and secure connection without screws.
What environmental temperature range supports reliable operation?
It operates between −20°C and 60°C to cover common industrial ambient conditions.
Note
K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously
Standards
EN 60947-5-1, UL 60947-5-1, IP 20 Terminals
Liens connexes
- Omron Monitoring Relay SPST 0.1A to 5A, 0V ac
- Omron Monitoring Relay SPST 0.1A to 5A 0V ac
- Omron Monitoring Relay SPDT 0.1A to 5A, 0V ac
- Omron Monitoring Relay SPDT 0.1A to 5A 0V ac
- Omron Monitoring Relay SPST 0V ac
- Omron Monitoring Relay SPST 2mA to 500mA, 0V ac
- Omron Monitoring Relay SPST 0V ac 0 V ac
- Omron Monitoring Relay SPST 10A to 200A 0V ac