Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 100mA to 5A, 240V ac
- N° de stock RS:
- 111-3105
- Référence fabricant:
- K8DT-AW2TA
- Fabricant:
- Omron
Sous-total (1 unité)*
158,47 €
(TVA exclue)
191,75 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
- Expédition à partir du 27 janvier 2027
Unité | Prix par unité |
|---|---|
| 1 + | 158,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 111-3105
- Référence fabricant:
- K8DT-AW2TA
- Fabricant:
- Omron
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | SPST | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 100mA | |
| Power Consumption | 2.5VA | |
| Maximum Current Sensed | 5A | |
| Current Sensitivity | Overcurrent, Undercurrent | |
| Terminal Type | Push-in | |
| IP Rating | IP20 | |
| Time Delay | 250 ms | |
| Relay Contact Current | 100μA, 5μA | |
| Supply AC Voltage | 240V ac | |
| Minimum Operating Temperature | +60°C | |
| Maximum Operating Temperature | 60°C | |
| Series | K8DT-AW | |
| Standards/Approvals | EN 60947-5-1, UL 60947-5-1, RoHS | |
| Width | 17.5mm | |
| Height | 90mm | |
| Length | 90mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration SPST | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 100mA | ||
Power Consumption 2.5VA | ||
Maximum Current Sensed 5A | ||
Current Sensitivity Overcurrent, Undercurrent | ||
Terminal Type Push-in | ||
IP Rating IP20 | ||
Time Delay 250 ms | ||
Relay Contact Current 100μA, 5μA | ||
Supply AC Voltage 240V ac | ||
Minimum Operating Temperature +60°C | ||
Maximum Operating Temperature 60°C | ||
Series K8DT-AW | ||
Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS | ||
Width 17.5mm | ||
Height 90mm | ||
Length 90mm | ||
- Pays d'origine :
- CN
Omron K8DT-AW Series Monitoring Relay, 100 to 240V AC Supply Voltage, 0.1A to 5A Sensing Range - K8DT-AW2TA
Features and Benefits:
• Adjustable response to both overcurrent and undercurrent for flexible monitoring
• Single pole single throw contact provides a clear switching action
• Push-in terminals enable quick wiring and reduced installation time
• 250ms time delay prevents nuisance tripping from short transients
• Low power draw of 2.5VA minimises load on control supply
Applications
• Ideal for monitoring current in single-phase distribution circuits
• Used with contactors to provide upstream current supervision
• Can be used for load-loss detection in heating and pump systems
What environmental temperature range can it operate within?
How is the device protected against ingress and where is it intended to be mounted?
Which standards cover its design and safety characteristics?
What are the Terminal and switching current specifics?
Note
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously
Standards
Liens connexes
- Omron Monitoring Relay SPST 100mA to 5A, 0V ac
- Omron Monitoring Relay SPDT 100mA to 5A
- Omron Monitoring Relay SPST 100mA to 5A 26.4V ac
- Omron Monitoring Relay SPST 240V ac
- Omron Monitoring Relay SPST 240V ac
- Omron Monitoring Relay SPDT 100mA to 5A, 20.4→26.4 V
- Omron Monitoring Relay DIN Rail, Monitoring: 0 °C to 999 °C 240V ac
- Omron Monitoring Relay SPST 2mA to 500mA, 240V ac
