Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 10A to 200A, 0 V ac, 0V ac

N° de stock RS:: 111-3098
Référence fabricant:: K8DT-AS3TD
Fabricant:: Omron

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 10A to 200A, 0 V ac, 0V ac

Sous-total (1 unité)*

138,12 €

(TVA exclue)

167,13 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 16 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	138,12 €

*Prix donné à titre indicatif

N° de stock RS:: 111-3098
Référence fabricant:: K8DT-AS3TD
Fabricant:: Omron

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPST
	Mount Type	DIN Rail
	Minimum Current Sensed	10A
	Maximum Current Sensed	200A
	Power Consumption	1.8VA
	Current Sensitivity	Undercurrent, Overcurrent
	Terminal Type	Push-in
	IP Rating	IP20
	Time Delay	250 ms
	Supply DC Voltage	0 V ac
	Minimum Operating Temperature	-20°C
	Supply AC Voltage	0V ac
	Relay Contact Current	10, 200A
	Maximum Operating Temperature	60°C
	Height	90mm
	Length	90mm
	Series	K8DT-AS
	Width	17.5mm
	Standards/Approvals	EN 60947-5-1, UL 60947-5-1, RoHS

	Sélectionner tout
	Marque Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPST
	Mount Type DIN Rail
	Minimum Current Sensed 10A
	Maximum Current Sensed 200A
	Power Consumption 1.8VA
	Current Sensitivity Undercurrent, Overcurrent
	Terminal Type Push-in
	IP Rating IP20
	Time Delay 250 ms
	Supply DC Voltage 0 V ac
	Minimum Operating Temperature -20°C
	Supply AC Voltage 0V ac
	Relay Contact Current 10, 200A
	Maximum Operating Temperature 60°C
	Height 90mm
	Length 90mm
	Series K8DT-AS
	Width 17.5mm
	Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS

English Datasheet

Se connecter pour voir les modèles CAO

Omron K8DT-AS Series Monitoring Relay, 10A Relay Contact Current, 250ms Time Delay - K8DT-AS3TD

This monitoring relay detects and responds to deviations in current so single‑phase installations maintain defined operating conditions. It is designed for rail mounting in control cabinets and provides timed switching to protect equipment against both low and high current events while operating across a wide ambient temperature range.

Features and Benefits:

• Detects current from 10A to 200A, ensuring adjustable sensing coverage
• Provides undercurrent and overcurrent detection to prevent fault conditions
• Implements a 250 MS time delay to avoid nuisance switching
• Uses push‑in terminals for fast, tool‑free wiring
• Employs SPST contact configuration for straightforward control integration
• Consumes 1.8 VA, ensuring low auxiliary power draw during operation

Applications

• Suitable for motor protection circuits where current limits must be monitored
• Ideal for monitoring branch circuits in industrial automation panels
• Used with single‑phase distribution systems for load supervision
• Can be used for preventative maintenance alarms on critical equipment

What environmental range can I expect during installation and operation?

It operates between -20 °C and 60 °C, so it is suitable for many indoor industrial environments but not for outdoor exposure beyond its enclosure rating.

How is it mounted within a control cabinet?

The unit is intended for DIN‑rail mounting, enabling quick installation alongside other modular control devices.

What protection rating does the enclosure provide against ingress?

The device has an IP20 rating, which protects against finger contact but not against liquids or fine dust ingress.

What standards does the product meet for electrical control use?

It conforms to EN 60947‑5‑1 and UL 60947‑5‑1 and is RoHS‑compliant, aligning with recognised control relay requirements.

What are the switching capability limits of the relay contact?

The relay contact is rated for switching currents including a nominal 10A and a maximum sensed current of 200A for detection purposes.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals