Omron Monitoring Relay, 1 Phase, Transistor, DIN Rail, 10A to 200A, 20.4→26.4 V

N° de stock RS:: 214-7947
Référence fabricant:: K8DT-AW3TD
Fabricant:: Omron

Omron Monitoring Relay, 1 Phase, Transistor, DIN Rail, 10A to 200A, 20.4→26.4 V

Sous-total (1 unité)*

158,47 €

(TVA exclue)

191,75 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

Expédition à partir du 19 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	158,47 €

*Prix donné à titre indicatif

N° de stock RS:: 214-7947
Référence fabricant:: K8DT-AW3TD
Fabricant:: Omron

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	Transistor
	Mount Type	DIN Rail
	Minimum Current Sensed	10A
	Maximum Current Sensed	200A
	Switching Voltage	24V
	Power Consumption	1.8VA
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	IP Rating	IP20
	Time Delay	0.1 to 30 s
	Supply DC Voltage	20.4→26.4 V
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS
	Width	17.5mm
	Series	K8DT-AW
	Height	100mm
	Length	90mm

	Sélectionner tout
	Marque Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration Transistor
	Mount Type DIN Rail
	Minimum Current Sensed 10A
	Maximum Current Sensed 200A
	Switching Voltage 24V
	Power Consumption 1.8VA
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	IP Rating IP20
	Time Delay 0.1 to 30 s
	Supply DC Voltage 20.4→26.4 V
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS
	Width 17.5mm
	Series K8DT-AW
	Height 100mm
	Length 90mm

Se connecter pour voir les modèles CAO

Omron K8DT-AW Series Monitoring Relay, 200A Maximum Current Sensed, 10A Minimum Current Sensed - K8DT-AW3TD

This monitoring relay provides single-phase current supervision for protection of electrical systems in industrial control panels. It senses deviations from set current thresholds and issues a transistor switching signal at 24V to indicate overcurrent or undercurrent conditions. Designed for DIN-rail mounting, it operates within typical industrial temperature ranges and connects via push-in terminals for Rapid installation.

Features and Benefits:

• Detects currents from 10 A to 200 A, offering a broad sensing range
• Adjustable time delay 0.1-30 s, reducing nuisance trips during transients
• Accepts 20.4-26.4V supply for flexible DC/AC control systems
• Transistor output enables fast solid-state signalling at 24 V
• Low power draw of 1.8 VA, minimising load on the control supply

Applications

• Suitable for monitoring motor running currents to indicate stall or overload
• Ideal for detecting supply loss on single-phase feeders in panels
• Used with industrial controllers to alarm on undervoltage-driven low current
• Can be used for preventive maintenance by logging persistent overcurrent events

What environmental protection does it provide for panel use?

The enclosure has an IP20 rating, offering protection against solid objects while requiring installation inside an enclosed cabinet.

How is it mounted and connected in existing switchgear?

It clips onto a standard DIN rail and uses push-in terminals to simplify wiring without screws.

What thermal limits should be observed during operation?

It is specified to operate between -20 °C and 60 °C, so ambient and adjacent component heating must be considered.

Which output configuration is available for interfacing with PLCs?

A transistor contact configuration is provided, suitable for direct interfacing with 24V control inputs.

Are there any material or regulatory considerations for procurement?

The unit complies with RoHS directives, indicating restriction of certain hazardous substances.