PUI Audio Microphone MEMS, 20 kHz
- N° de stock RS:
- 287-720
- Référence fabricant:
- AMM-2742-T-WP-R
- Fabricant:
- PUI Audio
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 ruban de 2 unités)*
5,93 €
(TVA exclue)
7,176 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 250 unité(s) expédiée(s) à partir du 27 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le ruban* |
|---|---|---|
| 2 - 18 | 2,965 € | 5,93 € |
| 20 - 198 | 2,67 € | 5,34 € |
| 200 - 998 | 2,46 € | 4,92 € |
| 1000 - 1998 | 2,28 € | 4,56 € |
| 2000 + | 1,855 € | 3,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 287-720
- Référence fabricant:
- AMM-2742-T-WP-R
- Fabricant:
- PUI Audio
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | PUI Audio | |
| Product Type | Microphone | |
| Sub Type | MEMS | |
| Directionality/Polar Pattern | Omni Directional | |
| Maximum Operating Voltage | 3.6V | |
| Maximum Sound Pressure Level | 160dB | |
| Impedance | 300Ω | |
| Sensitivity | 42dB | |
| Length | 2.75mm | |
| Maximum Frequency Response | 20kHz | |
| Standards/Approvals | REACH, RoHS | |
| Minimum Frequency Response | 0.02kHz | |
| Minimum Operating Voltage | 1.5V | |
| Sélectionner tout | ||
|---|---|---|
Marque PUI Audio | ||
Product Type Microphone | ||
Sub Type MEMS | ||
Directionality/Polar Pattern Omni Directional | ||
Maximum Operating Voltage 3.6V | ||
Maximum Sound Pressure Level 160dB | ||
Impedance 300Ω | ||
Sensitivity 42dB | ||
Length 2.75mm | ||
Maximum Frequency Response 20kHz | ||
Standards/Approvals REACH, RoHS | ||
Minimum Frequency Response 0.02kHz | ||
Minimum Operating Voltage 1.5V | ||
PUI Audio Microphone, 300Ω Impedance, Omni Directional Polar Pattern - AMM-2742-T-WP-R
This miniature microphone is a MEMS-based sensing element designed for audio capture and acoustic measurement in industrial and electronic systems. It operates across a wide frequency range and is suitable for integration where compact, low-voltage sound detection is required. The component offers an omnidirectional pickup characteristic and a pin-type electrical Interface for straightforward connection in sensor and instrumentation assemblies.
Features and Benefits:
• Omnidirectional polar pattern for uniform sound detection
• 300Ω impedance for predictable matching with preamplifiers
• Sensitivity -42dB to detect low-level acoustic signals
• High SPL 160dB capability for loud-source measurement
• Operates from 1.5V to 3.6V for low-voltage systems
• 300Ω impedance for predictable matching with preamplifiers
• Sensitivity -42dB to detect low-level acoustic signals
• High SPL 160dB capability for loud-source measurement
• Operates from 1.5V to 3.6V for low-voltage systems
Applications
• Suitable for acoustic sensors in automation equipment
• Ideal for sound-level monitoring in mechanical testing
• Used for audio input in embedded electronics designs
• Can be used for environmental noise logging in facilities
• Ideal for sound-level monitoring in mechanical testing
• Used for audio input in embedded electronics designs
• Can be used for environmental noise logging in facilities
What connector type is used for electrical connection?
It uses a pin-type connector that allows direct mating to PCB headers or harnesses in Compact assemblies.
How small is the sensing element for constrained spaces?
The Active element measures 2.75mm in length, permitting installation where a minimal profile is required.
What frequency range can I expect for accurate capture?
The device responds from 0.02 kHz up to 20 kHz, covering infrasonic through full audible bandwidth for diagnostic and monitoring tasks.
Are there any material or regulatory characteristics noted for integration?
The component meets REACH and RoHS standards, indicating conformity with common substance‑restriction requirements in electronics manufacturing.