Références fabricant

Honeywell Standard Simulated Roller Lever Micro Switch, PCB Terminal Terminal, 6A, 250 V, SPDT, IP40

N° de stock RS:: 205-6123
Référence fabricant:: ZM160C20E01
Fabricant:: Honeywell

Honeywell Standard Simulated Roller Lever Micro Switch, PCB Terminal Terminal, 6A, 250 V, SPDT, IP40

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 205-6123
Référence fabricant:: ZM160C20E01
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Micro Switch
	Actuator Type	Standard Simulated Roller Lever
	Terminal Type	PCB Terminal
	Contact Configuration	SPDT
	Housing Material	PBT
	IP Rating	IP40
	Operating Force	150g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Microswitch Type	Subminiature
	Contact AC Voltage	250V
	Series	ZM1
	Width	6.4mm
	Standards/Approvals	CQC to GB 15092.1, cUL to UL 61058-1, UL, RoHS, REACH, ENEC to IEC 61058-1, CE, CQC
	Mechanical Life	1000000min
	Length	19.8mm
	Depth	10.2mm
	Hazardous Area Certification	NO

	Sélectionner tout
	Marque Honeywell
	Product Type Micro Switch
	Actuator Type Standard Simulated Roller Lever
	Terminal Type PCB Terminal
	Contact Configuration SPDT
	Housing Material PBT
	IP Rating IP40
	Operating Force 150g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Microswitch Type Subminiature
	Contact AC Voltage 250V
	Series ZM1
	Width 6.4mm
	Standards/Approvals CQC to GB 15092.1, cUL to UL 61058-1, UL, RoHS, REACH, ENEC to IEC 61058-1, CE, CQC
	Mechanical Life 1000000min
	Length 19.8mm
	Depth 10.2mm
	Hazardous Area Certification NO

Honeywell ZM1 Series Micro Switch, SPCO Contact Configuration, 6A Switch Contact Current - ZM160C20E01

This micro switch provides compact, single-pole changeover switching for control and detection tasks in industrial and electronic assemblies. It is designed for PCB mounting and operates reliably across a wide temperature range, making it suitable for equipment where space is limited and consistent electrical switching is required.

Features and Benefits:

• Simulated roller lever actuator for positive mechanical engagement and consistent actuation
• SPCO contact arrangement allowing a single input to switch between circuits
• Rated switching current 6A enabling moderate-load control on PCB assemblies
• Operates from -40°C to 125°C for use across varied thermal environments
• Mechanical endurance of 400 cycles supporting repetitive actuation testing and short-run applications
• IP40 enclosure grade providing protection from solid objects in controlled environments

Applications

• Suitable for limit-switch detection in automated machinery
• Ideal for position sensing in small electromechanical assemblies
• Used for user-input switching on control PCBs in instrumentation
• Can be used for safety interlocks in Compact electrical enclosures

What Terminal style does it use for PCB integration?

It employs PCB terminals for direct through-hole mounting, simplifying board-level installation and electrical connection.

Which approvals indicate conformity to international switch standards?

The product holds multiple approvals including cUL to UL 61058-1 and ENEC to IEC 61058-1, alongside RoHS and REACH compliance for material and safety considerations.

How does the actuator type affect installation orientation?

The simulated roller lever provides a defined contact point and can be actuated from varying approach angles, aiding integration where mechanical engagement direction varies.

What environmental limitation should be considered for enclosure selection?

With an IP40 rating, the device should be placed within enclosures that limit dust ingress and prevent exposure to moisture for reliable operation.