Honeywell Short Lever Micro Switch, Solder Terminal, 6A, 250 V, SPDT, IP40

Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
205-6076
Référence fabricant:
ZM160C10B01
Fabricant:
Honeywell
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Honeywell

Product Type

Micro Switch

Actuator Type

Short Lever

Terminal Type

Solder

Contact Configuration

SPDT

Housing Material

PBT

IP Rating

IP40

Operating Force

150g

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Microswitch Type

Subminiature

Contact AC Voltage

250V

Series

ZM1

Width

6.4mm

Standards/Approvals

ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE, RoHS, REACH, UL

Hazardous Area Certification

No

Mechanical Life

1000000min

Length

19.8mm

Depth

10.2mm

Pays d'origine :
CN

Honeywell ZM1 Series Micro Switch, 6A Switch Contact Current, Short Lever Actuator Type - ZM160C10B01


This micro switch is a Compact electromechanical actuator designed for precise switching in control and sensing circuits. It provides a short lever actuation for quick, accurate input and connects via solder terminals for PCB mounting. The device is suitable for environments requiring moderate ingress protection and extended temperature range operation.

Features and Benefits:


• Short lever actuator enables rapid, repeatable switching response
• Single-pole changeover contacts carry up to 6A for power handling
• Solder Terminal simplifies PCB assembly and secure electrical connection
• Rated for operation between -40°C and 125°C for varied thermal conditions
• Mechanical endurance of 400 cycles supports intermittent actuation tasks
• IP40 ingress protection reduces dust-related contact issues

Applications


• Suitable for limit switching in automated machinery
• Ideal for control panels and Interface assemblies on PCBs
• Used with electromechanical relays for signal routing and safety interlocks
• Can be used for position detection in small mechanical systems

What contact arrangement does it offer and how does that affect control circuits?


It uses a single-pole changeover contact configuration, allowing one input to switch between two outputs for simple make/break logic functions.

Which Terminal style is provided and what assembly methods suit it?


The switch has solder terminals, making it appropriate for reflow or hand-soldering on printed circuit boards where a permanent connection is required.

How does the ingress protection rating influence installation?


An IP40 rating means the device is protected against solid objects greater than 1mm but not against water, so it should be mounted in dry or enclosed locations.

What approvals and standards support its use in regulated equipment?


It holds multiple approvals to recognised standards including ENEC to IEC 61058-1, cUL to UL 61058-1 and CQC, alongside CE, RoHS and REACH compliance, allowing integration into certified electrical products.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.