Références fabricant

Fluke 707 Loop Calibrator Battery 30V

N° de stock RS:: 426-2678
Numéro d'article Distrelec:: 176-80-416
Référence fabricant:: Fluke 707
Fabricant:: Fluke

Sous-total (1 unité)*

1 385,00 €

(TVA exclue)

1 675,85 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

24 unité(s) prête(s) à être expédiée(s)
Plus 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 1 unité(s) expédiée(s) à partir du 27 mai 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	1 385,00 €

*Prix donné à titre indicatif

N° de stock RS:: 426-2678
Numéro d'article Distrelec:: 176-80-416
Référence fabricant:: Fluke 707
Fabricant:: Fluke

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Fluke
	Product Type	Loop Calibrator
	Model Number	707
	Accuracy	±0.015 %
	Resolution	0.001 mA
	Battery Type	Alkaline
	Battery Life	18h
	Power Source	Battery
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	55°C
	Width	152mm
	Standards/Approvals	CSA C22.2 No. 1010.1:1992
	Length	70mm
	Height	41mm
	Weight	224g
	Hazardous Area Certification	No
	Safety Category Voltage	30V

	Sélectionner tout
	Marque Fluke
	Product Type Loop Calibrator
	Model Number 707
	Accuracy ±0.015 %
	Resolution 0.001 mA
	Battery Type Alkaline
	Battery Life 18h
	Power Source Battery
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 55°C
	Width 152mm
	Standards/Approvals CSA C22.2 No. 1010.1:1992
	Length 70mm
	Height 41mm
	Weight 224g
	Hazardous Area Certification No
	Safety Category Voltage 30V

Statut RoHS : Exempté

Pays d'origine :: CN

Fluke Loop Calibrator, ±0.015% Accuracy, 18h Battery Life - Fluke 707

This loop calibrator is a handheld tool for calibration, repair and maintenance of current loops in industrial control and process environments. It provides sourcing, simulation and measurement of loop currents, Plus loop voltage checks and a built-in loop supply, all in a compact, carry-friendly package suited to field and workshop use.

Features & Benefits

• 0.001mA resolution delivers fine measurement detail for precise adjustments
• ±0.015% accuracy ensures tight current calibration results
• 24V loop supply with simultaneous mA measurement supports live loop testing
• Simultaneous display of mA and percentage of span simplifies diagnostics
• Selectable step or ramp outputs enable automated response checks
• Battery‑powered operation offers around 18 h runtime for long shifts

Applications

• Suitable for commissioning and calibrating 4–20 mA transmitters and I/Ps
• Ideal for fault‑finding in PLC analogue inputs and field transmitters
• Used for verifying loop‑powered indicators and control valves
• Can be used for HART loop checks with a 250 Ω resistor in place
• Used with workshop bench setups for maintenance routines

What voltage range can be measured to verify loop supply?

The instrument measures d.c. loop voltage from 0V to 28V to check supply and drop conditions.

How does it assist when replacing field transmitters?

It can source and simulate mA signals, allowing verification of receiver response before and after replacement.

What environmental limits apply during normal operation?

Operating temperatures range from −10 °C to 55 °C and it withstands relative humidity profiles up to 95% at lower temperatures.

What safety and approval information is relevant for industrial use?

The calibrator meets CSA C22.2 No.1010.1:1992 and is rated for a 30V safety category.

How portable is the instrument for on‑site use?

The device is lightweight at 224 g and uses alkaline battery power with a removable battery door for quick changes.