Martindale TEK 300 Loop Calibrator Battery
- N° de stock RS:
- 207-9266
- Référence fabricant:
- RSTEK300
- Fabricant:
- Martindale
Sous-total (1 unité)*
571,02 €
(TVA exclue)
690,93 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 571,02 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-9266
- Référence fabricant:
- RSTEK300
- Fabricant:
- Martindale
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Martindale | |
| Product Type | Loop Calibrator | |
| Model Number | TEK 300 | |
| Resolution | 10 μA | |
| Battery Type | AA | |
| Power Source | Battery | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Width | 100 mm | |
| Weight | 380g | |
| Standards/Approvals | No | |
| Height | 44mm | |
| Length | 180mm | |
| Hazardous Area Certification | No | |
| Calibrated | UKAS | |
| Sélectionner tout | ||
|---|---|---|
Marque Martindale | ||
Product Type Loop Calibrator | ||
Model Number TEK 300 | ||
Resolution 10 μA | ||
Battery Type AA | ||
Power Source Battery | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Width 100 mm | ||
Weight 380g | ||
Standards/Approvals No | ||
Height 44mm | ||
Length 180mm | ||
Hazardous Area Certification No | ||
Calibrated UKAS | ||
Statut RoHS : Exempté
Martindale Direct Current Calibrator
The Martindale direct current calibrator is able to sink or source a current up to 20mA. It is intended for process control instrumentation and general purpose signal
injection applications. It has a monitor mode facility incorporated into the design, whereby the current (0mA to 20mA) in the process loop can be monitored and read directly from the digital display. This device is also fully protected against inadvertent misuse. This low-cost unit offers exceptional value for money means of delivering and measuring current ranging between 0mA and 20mA currents. This makes it ideal for cost-effective application in testing, calibrating and troubleshooting in a wide range of process control environments.
Features and Benefits
Sink, source and monitor modes ranging between 0mA and 20mA F. S. (+0.1%)
DC/DC converter output of 28.5V (+0.1V)
Resolution of 10μA
Overload protection for additional safety
ABS case with clear three digit LCD display
Temperature drift 150ppm°C
Linearity of 0.15%
Output noise (typically) of 4mV p/p
Battery condition and error indication LEDs
Requires two PP3 alkaline batteries
Capable of withstanding DC voltages up to 50V but can be damaged by AC input
Operating temperature ranges between 0°C and 50°C
Applications
Process control automation
Manufacturing
Instrumentation
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
Liens connexes
- Martindale TEK 300 Loop Calibrator Battery
- Time Electronics 7007 Loop Calibrator Battery
- Time Electronics 7006 Loop Calibrator Battery
- Time Electronics 1048 Loop Calibrator Battery
- Fluke 707 Loop Calibrator Battery 30V
- Fluke 709 Loop Calibrator Battery
- Fluke 709H Loop Calibrator Battery
- Fluke 705 Loop Calibrator Battery 30V