Igus Bearing Block WJ200UM-01-20 DryLin W Series
- N° de stock RS:
- 667-1295
- Référence fabricant:
- WJ200UM-01-20
- Fabricant:
- Igus
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
23,96 €
(TVA exclue)
28,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 106 unité(s) expédiée(s) à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 23,96 € |
| 5 - 9 | 22,99 € |
| 10 + | 22,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 667-1295
- Référence fabricant:
- WJ200UM-01-20
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Series | DryLin W | |
| Product Type | Bearing Block | |
| Carriage Length | 45mm | |
| Carriage Width | 42.5mm | |
| Static Load Rating | 3200N | |
| Carriage Material | Die Cast Zinc | |
| Carriage Type | Slider | |
| Acceptable Rail Width | 82mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Series DryLin W | ||
Product Type Bearing Block | ||
Carriage Length 45mm | ||
Carriage Width 42.5mm | ||
Static Load Rating 3200N | ||
Carriage Material Die Cast Zinc | ||
Carriage Type Slider | ||
Acceptable Rail Width 82mm | ||
Standards/Approvals No | ||
- Pays d'origine :
- DE
Igus DryLin W Series Bearing Block, 3200N Static Load Rating, 45mm Carriage Length - WJ200UM-01-20
This bearing block provides guided linear motion support for industrial automation and mechanical systems, designed to run on compatible rails and carry carriage loads in constrained assemblies. It is intended for use where a compact slider carriage is required to transmit static loads while integrating with DryLin linear guide setups.
Features and Benefits:
• Static capacity 3200N delivers robust load support for assemblies
• Carriage constructed from die-cast zinc reduces wear under load
• Slider format enables smooth linear guidance with minimal maintenance
• Carriage width 42.5mm offers a narrow footprint for tight installations
• Accepts rails up to 82mm to support a range of guide profiles
• Carriage constructed from die-cast zinc reduces wear under load
• Slider format enables smooth linear guidance with minimal maintenance
• Carriage width 42.5mm offers a narrow footprint for tight installations
• Accepts rails up to 82mm to support a range of guide profiles
Applications
• Suitable for pick-and-place gantry axis in automation cells
• Ideal for mounting sensors or actuators on linear stages
• Used with compact conveyor transfer systems in electronics lines
• Can be used for sliding fixtures in electrical panel assembly
• Ideal for mounting sensors or actuators on linear stages
• Used with compact conveyor transfer systems in electronics lines
• Can be used for sliding fixtures in electrical panel assembly
What carriage length is provided for mounting requirements?
The block uses a 45mm carriage which offers a short mounting base for integrating brackets and fitted components.
What material considerations affect thermal and mechanical behaviour?
The carriage alloy is die-cast zinc, which provides dimensional stability and predictable expansion under temperature variations compared with some plastics.
Which rail widths will this block interface with?
It is compatible with rails having a nominal width of up to 82mm, allowing selection from a range of standard linear guide profiles.
How does the static load rating influence selection for stationary loads?
The 3200N static rating defines the maximum non-moving load the carriage can sustain without exceeding its static capacity, useful for specifying supports in stopped or parked conditions.
Liens connexes
- Igus Bearing Block WJ200UM-01-16 DryLin W Series
- Igus Guide Block WJ200UM-01-10-AL DryLin W Series, 1200 N Dynamic Load
- Igus Linear Guide Carriage WJ200UM-01-25 drylin W size 25 Series
- Igus Linear Guide Carriage WJ200UME-01-20 W Series
- Igus Linear Guide Bearing WJRM-01-20 DryLin W Series, 550 N Dynamic Load
- Igus Bearing Block WJ200QM-01-06 DryLin W Series, 140 N Dynamic Load
- Igus Linear Guide Carriage WJ200UME-01-16 W Series
- Igus Linear Guide Carriage TW-01-20 drylin T Series