Ewellix Makers in Motion LBBR 14 Bearing with 14 mm ID 21 mm OD 710 N 530 N
- N° de stock RS:
- 341-1510
- Référence fabricant:
- LBBR 14
- Fabricant:
- Ewellix Makers in Motion
Visuel non contractuel
Offre groupée disponible
Sous-total (1 unité)*
28,93 €
(TVA exclue)
35,01 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 18 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 28,93 € |
| 5 - 9 | 27,80 € |
| 10 + | 27,17 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 341-1510
- Référence fabricant:
- LBBR 14
- Fabricant:
- Ewellix Makers in Motion
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 21 mm | |
| Length | 28mm | |
| Inside Diameter | 14 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 710N | |
| Closure Type | Closed | |
| Base to Bore Centerline | 10.5mm | |
| Static Load Rating | 530N | |
| Material | Steel | |
| Standards/Approvals | No | |
| Series | LBBR | |
| Sélectionner tout | ||
|---|---|---|
Marque Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 21 mm | ||
Length 28mm | ||
Inside Diameter 14 mm | ||
End Type Shielded | ||
Dynamic Load Rating 710N | ||
Closure Type Closed | ||
Base to Bore Centerline 10.5mm | ||
Static Load Rating 530N | ||
Material Steel | ||
Standards/Approvals No | ||
Series LBBR | ||
Statut RoHS non applicable
- Pays d'origine :
- DE
LBBR Ball Bushings Without Seals - Closed
Conforms to Series 1 of ISO10285
Unsealed bearing is fitted with a non contacting shield to exclude coarse debris
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Liens connexes
- Ewellix Makers in Motion LBBR 25 Bearing with 25 mm ID 35 mm OD 2120 N 1560 N
- Ewellix Makers in Motion LBBR 10 Bearing with 10 mm ID 17 mm OD 585 N 415 N
- Ewellix Makers in Motion LBBR 30 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBBR 16 Bearing with 16 mm ID 24 mm OD 930 N 630 N
- Ewellix Makers in Motion LBBR 12 Bearing with 12 mm ID 19 mm OD 695 N 510 N
- Ewellix Makers in Motion LBBR 20 Bearing with 20 mm ID 28 mm OD 1160 N 800 N
- Ewellix Makers in Motion LBBR 25-2LS Bearing with 25 mm ID 35 mm OD 2120 N 1560 N
- Ewellix Makers in Motion LBBR 20-2LS Bearing with 20 mm ID 28 mm OD 1160 N 800 N