Ewellix Makers in Motion LBBR 30 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- N° de stock RS:
- 284-9043
- Référence fabricant:
- LBBR 30
- Fabricant:
- Ewellix Makers in Motion
Visuel non contractuel
Offre groupée disponible
Sous-total (1 unité)*
42,21 €
(TVA exclue)
51,07 €
(TVA incluse)
Ajouter 2 unités pour bénéficier d'une livraison gratuite
En stock
- 15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 42,21 € |
| 5 - 9 | 40,52 € |
| 10 + | 39,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 284-9043
- Référence fabricant:
- LBBR 30
- Fabricant:
- Ewellix Makers in Motion
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 40 mm | |
| Length | 50mm | |
| Inside Diameter | 30 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 3150N | |
| Static Load Rating | 2700N | |
| Material | Steel | |
| Base to Bore Centerline | 20mm | |
| Closure Type | Closed | |
| Series | LBBR | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 40 mm | ||
Length 50mm | ||
Inside Diameter 30 mm | ||
End Type Shielded | ||
Dynamic Load Rating 3150N | ||
Static Load Rating 2700N | ||
Material Steel | ||
Base to Bore Centerline 20mm | ||
Closure Type Closed | ||
Series LBBR | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
LBBR Ball Bushings Without Seals - Closed
Conforms to Series 1 of ISO10285
Unsealed bearing is fitted with a non contacting shield to exclude coarse debris
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Liens connexes
- Ewellix LBBR 30-2LS, Bearing with 40mm Outside Diameter
- Ewellix Makers in Motion LBBR 30-2LS/HV6, Bearing with 40mm Outside Diameter
- Ewellix LBBR 14, Bearing with 21mm Outside Diameter
- Ewellix LBBR 25, Bearing with 35mm Outside Diameter
- Ewellix LBBR 20, Bearing with 28mm Outside Diameter
- Ewellix LBBR 12, Bearing with 19mm Outside Diameter
- Ewellix LBBR 16, Bearing with 24mm Outside Diameter
- Ewellix LBBR 10, Bearing with 17mm Outside Diameter