Ewellix Makers in Motion LBBR 12 Bearing with 12 mm ID 19 mm OD 695 N 510 N
- N° de stock RS:
- 284-9009
- Référence fabricant:
- LBBR 12
- Fabricant:
- Ewellix Makers in Motion
Offre groupée disponible
Sous-total (1 unité)*
24,39 €
(TVA exclue)
29,51 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 25 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 24 unité(s) expédiée(s) à partir du 09 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 24,39 € |
| 5 - 9 | 23,40 € |
| 10 + | 22,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 284-9009
- Référence fabricant:
- LBBR 12
- Fabricant:
- Ewellix Makers in Motion
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 19 mm | |
| Length | 28mm | |
| Inside Diameter | 12 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 695N | |
| Static Load Rating | 510N | |
| Base to Bore Centerline | 9.5mm | |
| Closure Type | Closed | |
| Material | Steel | |
| Standards/Approvals | No | |
| Series | LBBR | |
| Sélectionner tout | ||
|---|---|---|
Marque Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 19 mm | ||
Length 28mm | ||
Inside Diameter 12 mm | ||
End Type Shielded | ||
Dynamic Load Rating 695N | ||
Static Load Rating 510N | ||
Base to Bore Centerline 9.5mm | ||
Closure Type Closed | ||
Material Steel | ||
Standards/Approvals No | ||
Series LBBR | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
LBBR Ball Bushings Without Seals - Closed
Conforms to Series 1 of ISO10285
Unsealed bearing is fitted with a non contacting shield to exclude coarse debris
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Liens connexes
- Ewellix LBBR 12-2LS, Bearing with 19mm Outside Diameter
- Ewellix Makers in Motion LBBR 12-2LS/HV6, Bearing with 19mm Outside Diameter
- Ewellix LBBR 14, Bearing with 21mm Outside Diameter
- Ewellix LBBR 25, Bearing with 35mm Outside Diameter
- Ewellix LBBR 20, Bearing with 28mm Outside Diameter
- Ewellix LBBR 16, Bearing with 24mm Outside Diameter
- Ewellix LBBR 30, Bearing with 40mm Outside Diameter
- Ewellix LBBR 10, Bearing with 17mm Outside Diameter