Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch, 1 NO/1 NC, IP66, IP67, Zamak Housing, 240V ac, 10A
- N° de stock RS:
- 814-7873
- Référence fabricant:
- XCKD2145N12
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
74,90 €
(TVA exclue)
90,63 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 74,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 814-7873
- Référence fabricant:
- XCKD2145N12
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Actuator Type | Roller Lever | |
| Product Type | Limit Switch | |
| Contact Configuration | 1 NO/1 NC | |
| IP Rating | IP66, IP67 | |
| Housing Material | Zamak | |
| Contact Type | Snap Action | |
| Switching Current | 10A | |
| Terminal Type | Screw Clamp | |
| Series | OsiSense XC | |
| Minimum Operating Temperature | -25°C | |
| Switching DC Voltage | 250V dc | |
| Switching AC Voltage | 240V ac | |
| Maximum Operating Temperature | 70°C | |
| Width | 31mm | |
| Depth | 30mm | |
| Length | 65mm | |
| Standards/Approvals | CSA, CE, EN, IEC, RoHS, UL | |
| Hazardous Area Certification | No | |
| Mounting Orientation | Multi Directional | |
| Mechanical Life | 10000000Cycles | |
| Conduit Entry | 12.7 mm | |
| Operating Force | 0.1Nm | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Actuator Type Roller Lever | ||
Product Type Limit Switch | ||
Contact Configuration 1 NO/1 NC | ||
IP Rating IP66, IP67 | ||
Housing Material Zamak | ||
Contact Type Snap Action | ||
Switching Current 10A | ||
Terminal Type Screw Clamp | ||
Series OsiSense XC | ||
Minimum Operating Temperature -25°C | ||
Switching DC Voltage 250V dc | ||
Switching AC Voltage 240V ac | ||
Maximum Operating Temperature 70°C | ||
Width 31mm | ||
Depth 30mm | ||
Length 65mm | ||
Standards/Approvals CSA, CE, EN, IEC, RoHS, UL | ||
Hazardous Area Certification No | ||
Mounting Orientation Multi Directional | ||
Mechanical Life 10000000Cycles | ||
Conduit Entry 12.7 mm | ||
Operating Force 0.1Nm | ||
Statut RoHS : Exempté
- Pays d'origine :
- FR
Telemecanique Sensors Osizense XC Series Limit Switch, IP66/IP67, 10A Switching Current - XCKD2145N12
This limit switch is a Compact electromechanical device designed to detect and control position in industrial systems. It operates via a roller lever actuator and provides snap-action switching for straightforward on/off signalling in machinery and process equipment. The unit is built for harsh workplaces where ingress protection and Durable materials are required, and it mounts in multiple orientations to suit varied installation geometries.
Features and Benefits:
• 1NO1NC contact offering both normally open and normally closed operation
• IP66 IP67 rating allowing use in wet and dust-prone environments
• Zamak housing delivering robust mechanical resistance
• Switching capability up to 250VDC and 10A for substantial loads
• Mechanical life of 10000000 cycles reducing maintenance frequency
• Operating range from -25°C to 70°C for low-temperature applications
• IP66 IP67 rating allowing use in wet and dust-prone environments
• Zamak housing delivering robust mechanical resistance
• Switching capability up to 250VDC and 10A for substantial loads
• Mechanical life of 10000000 cycles reducing maintenance frequency
• Operating range from -25°C to 70°C for low-temperature applications
Applications
• Suitable for conveyor end-of-travel detection in factories
• Ideal for door position sensing in outdoor enclosures
• Used for limit feedback on hydraulic cylinder stroking
• Can be used for machine guard interlock monitoring
• Ideal for door position sensing in outdoor enclosures
• Used for limit feedback on hydraulic cylinder stroking
• Can be used for machine guard interlock monitoring
What type of electrical connection does it use?
It uses screw clamp terminals that accept secure wiring and straightforward field termination.
How is the device mounted to machinery?
It supports multi-directional mounting so it can be installed in varied orientations to match actuator approach angles.
What actuator motion does it accept?
The roller lever actuator converts linear or rotary contact into snap-action switching suitable for quick transition detection.
Which standards approvals does it meet for industrial deployment?
It carries approvals including CSA, CE, EN, IEC, RoHS and UL for conformity with common international standards.
What conduit provision is provided for cable entry?
A 12.7mm conduit entry is available to accommodate standard glands and cable management.
Standards
EN50047
Liens connexes
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch Lever
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch Body IP66 240V, 6A
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP65 240V ac, 10A
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 240V ac,
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 IP68, Zinc Zamak Alloy
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 Zinc Zamak Alloy Housing,
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP67 Zinc Zamak Alloy Housing,
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 500V