Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch Body, 1 NC/1 NO, IP66, Zamak Housing, 240V, 6A
- N° de stock RS:
- 700-4204
- Numéro d'article Distrelec:
- 304-23-701
- Référence fabricant:
- ZCMD21L1
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
65,27 €
(TVA exclue)
78,98 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- Plus 1 unité(s) expédiée(s) à partir du 31 août 2026
- Plus 48 unité(s) expédiée(s) à partir du 31 août 2026
- Plus 11 unité(s) expédiée(s) à partir du 03 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 65,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 700-4204
- Numéro d'article Distrelec:
- 304-23-701
- Référence fabricant:
- ZCMD21L1
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Actuator Type | Roller Lever | |
| Product Type | Limit Switch Body | |
| Contact Configuration | 1 NC/1 NO | |
| IP Rating | IP66 | |
| Housing Material | Zamak | |
| Contact Type | Snap Action | |
| Terminal Type | Cable | |
| Switching Current | 6A | |
| Series | OsiSense XC | |
| Switching AC Voltage | 240V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | RoHS | |
| Length | 50mm | |
| Width | 30mm | |
| Depth | 16mm | |
| Hazardous Area Certification | No | |
| Conduit Entry | 20 mm | |
| Mechanical Life | 10000000Cycles | |
| Mounting Orientation | Side | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Actuator Type Roller Lever | ||
Product Type Limit Switch Body | ||
Contact Configuration 1 NC/1 NO | ||
IP Rating IP66 | ||
Housing Material Zamak | ||
Contact Type Snap Action | ||
Terminal Type Cable | ||
Switching Current 6A | ||
Series OsiSense XC | ||
Switching AC Voltage 240V | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals RoHS | ||
Length 50mm | ||
Width 30mm | ||
Depth 16mm | ||
Hazardous Area Certification No | ||
Conduit Entry 20 mm | ||
Mechanical Life 10000000Cycles | ||
Mounting Orientation Side | ||
- Pays d'origine :
- ID
Telemecanique Sensors Osizense XC Series Limit Switch Body, 20mm Conduit Entry, Zamak Housing - ZCMD21L1
This limit switch body is a Compact actuator Interface designed for position-sensing and control in industrial systems. It pairs a roller-lever actuator with snap-action contacts to register mechanical movement and provide switching signals in machinery and equipment. The enclosure and mounting arrangement suit installations where a robust, side-mounted sensing device is required.
Features and Benefits:
• Snap-action contacts deliver quick switching response and repeatability
• 1 NC 1 NO configuration enables versatile circuit control options
• Rated for 6A at 240V to handle typical control loads
• IP66 ingress protection allows use in dusty and high-pressure wash environments
• Zamak housing provides sturdy mechanical resistance and longevity
• Mechanical life of 10,000,000 cycles supports high-duty applications
• 1 NC 1 NO configuration enables versatile circuit control options
• Rated for 6A at 240V to handle typical control loads
• IP66 ingress protection allows use in dusty and high-pressure wash environments
• Zamak housing provides sturdy mechanical resistance and longevity
• Mechanical life of 10,000,000 cycles supports high-duty applications
Applications
• Suitable for position detection on conveyor transfer points
• Ideal for end-of-travel sensing on industrial actuators
• Used with packaging machinery for product presence verification
• Can be used for safety interlock signalling in assembly lines
• Used for limit feedback on elevator and lift components
• Ideal for end-of-travel sensing on industrial actuators
• Used with packaging machinery for product presence verification
• Can be used for safety interlock signalling in assembly lines
• Used for limit feedback on elevator and lift components
What mounting orientation is required for installation?
It is designed for side mounting to align the roller-lever with lateral movement paths and fixed mounting points.
What type of electrical connection does it use?
The unit provides a cable Terminal arrangement for direct cable termination without separate Terminal blocks.
Which conduit size should be used for wiring entry?
A 20mm conduit entry is provided to accommodate standard flexible conduit or conduit fittings.
What operating temperature range can be expected?
It operates reliably from -25°C up to 70°C for typical industrial ambient conditions.
How does the actuator Interface handle mechanical input?
The roller-lever actuator converts linear or cam-driven motion into the internal snap-action switching event for discrete signal output.
Liens connexes
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 240V, 6A
- Telemecanique Sensors OsiSense XC Series Limit Switch IP66 240V ac, 6A
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 240V
- Telemecanique Sensors OsiSense XC Series Limit Switch IP66 240V ac, 6A
- Telemecanique Sensors OsiSense XC Series Limit Switch IP66 240V ac, 6A
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 500V, 10A
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP65 240V ac, 3A