Telemecanique Sensors ZCD Series Roller Lever Limit Switch, 1 NO/2 NC, IP66, IP67, Zinc Alloy Housing, 240V ac, 750mA

N° de stock RS:: 700-4264
Référence fabricant:: ZCD39
Fabricant:: Telemecanique Sensors

Telemecanique Sensors ZCD Series Roller Lever Limit Switch, 1 NO/2 NC, IP66, IP67, Zinc Alloy Housing, 240V ac, 750mA

Sous-total (1 unité)*

47,60 €

(TVA exclue)

57,60 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité
1 +	47,60 €

*Prix donné à titre indicatif

N° de stock RS:: 700-4264
Référence fabricant:: ZCD39
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP66, IP67
	Contact Configuration	1 NO/2 NC
	Housing Material	Zinc Alloy
	Contact Type	Snap Action
	Switching Current	750mA
	Terminal Type	Screw
	Series	ZCD
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	RoHS
	Width	31mm
	Depth	30mm
	Length	65mm
	Hazardous Area Certification	No
	Conduit Entry	20 mm
	Mounting Orientation	Side
	Mechanical Life	10000000Cycles

	Sélectionner tout
	Marque Telemecanique Sensors
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP66, IP67
	Contact Configuration 1 NO/2 NC
	Housing Material Zinc Alloy
	Contact Type Snap Action
	Switching Current 750mA
	Terminal Type Screw
	Series ZCD
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals RoHS
	Width 31mm
	Depth 30mm
	Length 65mm
	Hazardous Area Certification No
	Conduit Entry 20 mm
	Mounting Orientation Side
	Mechanical Life 10000000Cycles

Pays d'origine :: ID

Telemecanique Sensors ZCD Series Limit Switch, 20mm Conduit Entry, IP66, IP67 - ZCD39

This limit switch is a Compact electromechanical device that detects mechanical movement and provides snap‑action electrical switching for industrial control systems. It is designed for side mounting and uses a roller‑lever actuator to convert physical motion into a change of contact state, operating across a wide ambient temperature range for use in varied installation environments.

Features and Benefits:

• Roller‑lever actuator offers precise mechanical actuation and dependable switching
• Snap‑action contacts provide quick state change and reduced contact bounce
• Contact arrangement gives one normally open and two normally closed outputs
• Rated for switching up to 250 V dc for DC control circuits
• IP66 and IP67 ingress protection allows dust‑tight and temporary immersion use
• Mechanical endurance specified at 10,000,000 cycles supports long service intervals

Applications

• Suitable for conveyor end‑of‑travel detection tasks
• Ideal for machine guard position monitoring in factories
• Used with automated valves requiring discrete position feedback
• Can be used for safety interlocks on access panels
• Applicable to packaging machinery position sensing operations

What type of terminals are provided for wiring?

Screw terminals are fitted to secure conductors and enable straightforward field wiring.

How is the switch housed to withstand industrial environments?

The enclosure is manufactured from zinc alloy to provide structural robustness in demanding locations.

What conduit provision exists for cable entry?

A 20 mm conduit entry is provided for standard cable glands and conduit fittings.

What are the electrical switching limits for AC and current?

The device switches up to 240 V ac and is rated for a maximum switching current of 0.75 A.

What operating temperature range can be expected in service?

The switch functions across temperatures from −25 °C to 70 °C.