Telemecanique Sensors ZCD Series Limit Switch, 1 NO/1 NC, IP66, IP67, Zinc Alloy Housing, 240V ac, 1.5A

N° de stock RS:: 447-3610
Référence fabricant:: ZCD25
Fabricant:: Telemecanique Sensors

Telemecanique Sensors ZCD Series Limit Switch, 1 NO/1 NC, IP66, IP67, Zinc Alloy Housing, 240V ac, 1.5A

Sous-total (1 unité)*

36,20 €

(TVA exclue)

43,80 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

30 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	36,20 €

*Prix donné à titre indicatif

N° de stock RS:: 447-3610
Référence fabricant:: ZCD25
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Product Type	Limit Switch
	IP Rating	IP66, IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Zinc Alloy
	Contact Type	Slow Action
	Terminal Type	Screw Clamp
	Switching Current	1.5A
	Series	ZCD
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Standards/Approvals	EN, IEC, RoHS, REACH
	Width	31mm
	Length	65mm
	Depth	30mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles

	Sélectionner tout
	Marque Telemecanique Sensors
	Product Type Limit Switch
	IP Rating IP66, IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Zinc Alloy
	Contact Type Slow Action
	Terminal Type Screw Clamp
	Switching Current 1.5A
	Series ZCD
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Standards/Approvals EN, IEC, RoHS, REACH
	Width 31mm
	Length 65mm
	Depth 30mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles

Se connecter pour voir les modèles CAO

Statut RoHS : Exempté

Pays d'origine :: ID

Telemecanique Sensors ZCD Series Limit Switch, IP66, IP67, Zinc Alloy Housing - ZCD25

This limit switch is a Compact mechanical device designed to detect and interrupt motion within industrial control systems. It provides slow-action contact changeover for monitoring positions and end-stops in machinery and is suitable for environments where ingress protection and a broad temperature range are required.

Features and Benefits:

• Zinc-alloy housing resists mechanical damage and supports industrial use
• 1 NO 1 NC slow-action contact arrangement allows precise state control
• Switching capability 250V DC and 240V AC enables mixed-voltage applications
• Rated switching current 1.5 A supports control of low-power circuits
• Mechanical life 5,000,000 cycles minimises maintenance intervals
• Screw-clamp terminals permit secure, repeatable wiring connections

Applications

• Suitable for conveyor end-stop detection in manufacturing lines
• Ideal for actuator position sensing in automation equipment
• Used with control panels requiring Compact limit devices
• Can be used for gate or door position monitoring outdoors
• Appropriate for safety interlocks where slow-action switching is required

What ingress protection does it provide for harsh environments?

It features IP66 and IP67 ratings for protection against dust and temporary or brief immersion.

What temperature range can it operate within reliably?

It operates from −25 °C up to 70 °C to cover cold starts and warm process conditions.

Which standards and directives has it been assessed against?

It meets EN and IEC standards and complies with RoHS and REACH substance requirements.

How are electrical connections terminated for field wiring?

Connections are MADE via screw-clamp terminals designed for secure conductor retention.

What mechanical size should I plan for when integrating into equipment?

The unit occupies a Compact footprint measuring 65 x 31 x 30 mm for space-conscious installations.