Telemecanique Sensors ZCD Series Limit Switch Body, 1 NO/1 NC, IP66, IP67, Zamak Housing, 240V ac, 1.5A

N° de stock RS:: 447-3604
Numéro d'article Distrelec:: 301-12-126
Référence fabricant:: ZCD21
Fabricant:: Telemecanique Sensors

Telemecanique Sensors ZCD Series Limit Switch Body, 1 NO/1 NC, IP66, IP67, Zamak Housing, 240V ac, 1.5A

Sous-total (1 unité)*

30,50 €

(TVA exclue)

36,90 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stock limité

20 restante(s), prêt à être expédié
Plus 113 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 54 unité(s) expédiée(s) à partir du 15 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	30,50 €

*Prix donné à titre indicatif

N° de stock RS:: 447-3604
Numéro d'article Distrelec:: 301-12-126
Référence fabricant:: ZCD21
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Product Type	Limit Switch Body
	IP Rating	IP66, IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Zamak
	Contact Type	Snap Action
	Switching Current	1.5A
	Terminal Type	Screw Clamp
	Series	ZCD
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Depth	30mm
	Standards/Approvals	RoHS, REACH, IEC, EN
	Width	31mm
	Length	65mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles

	Sélectionner tout
	Marque Telemecanique Sensors
	Product Type Limit Switch Body
	IP Rating IP66, IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Zamak
	Contact Type Snap Action
	Switching Current 1.5A
	Terminal Type Screw Clamp
	Series ZCD
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Depth 30mm
	Standards/Approvals RoHS, REACH, IEC, EN
	Width 31mm
	Length 65mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles

Se connecter pour voir les modèles CAO

Statut RoHS : Exempté

Pays d'origine :: ID

Telemecanique Sensors ZCD Series Limit Switch Body, IP66/IP67, 1 NO/1 NC Contact Configuration - ZCD21

This limit switch body is a Compact industrial switching enclosure designed to house a snap-action switching mechanism for position detection in control systems. It is intended for use in automation and electrical installations where a robust, sealed switch body is required, and operates across a typical industrial temperature range.

Features and Benefits:

• Zamak housing offers robust corrosion resistance and durability • IP66 and IP67 protection enables reliable washdown and immersion use • 5,000,000 cycle mechanical life supports long-term repetitive operation • Screw clamp terminals permit secure, vibration-resistant wiring connections • Snap-action contacts deliver fast transition for accurate detection • Operates from -25°C to 70°C for wide environmental compatibility

Applications

• Suitable for machine end-of-travel detection in automated conveyors • Ideal for position sensing on industrial valves and actuators • Used with control panels requiring Compact sealed switch bodies • Can be used for safety interlocks on production equipment • Suitable for outdoor enclosures exposed to washdown or rain

What contact arrangement is provided and how does it affect wiring?

It provides one normally open and one normally closed contact, allowing both make and break signalling from a single actuator connection.

What electrical loads can it switch in AC and DC circuits?

It is rated to switch up to 240V AC at 1.5A and up to 250V DC for compatible low-current control circuits.

How does the Terminal design aid installation in confined panels?

The screw clamp terminals allow straightforward conductor insertion and secure clamping without specialised ferrules, simplifying field wiring in tight spaces.

Which standards does it conform to for material and safety considerations?

It meets RoHS and REACH substance requirements and is built to recognised IEC and EN norms for switch components.