Honeywell SSCE Series Plunger Limit Switch, SPDT, IP68, Die Cast Zinc Housing, 600V ac, 6A
- N° de stock RS:
- 344-3589
- Numéro d'article Distrelec:
- 136-30-209
- Référence fabricant:
- SSCEB31B
- Fabricant:
- Honeywell
Sous-total (1 unité)*
194,11 €
(TVA exclue)
234,87 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 16 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 104 unité(s) expédiée(s) à partir du 04 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 194,11 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 344-3589
- Numéro d'article Distrelec:
- 136-30-209
- Référence fabricant:
- SSCEB31B
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| IP Rating | IP68 | |
| Contact Configuration | SPDT | |
| Housing Material | Die Cast Zinc | |
| Contact Type | Snap Action | |
| Terminal Type | Cable | |
| Switching Current | 6A | |
| Series | SSCE | |
| Switching AC Voltage | 600V ac | |
| Switching DC Voltage | 250V dc | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 90°C | |
| Length | 54mm | |
| Width | 40mm | |
| Standards/Approvals | CE, CSA, UL | |
| Depth | 16mm | |
| Hazardous Area Certification | NO | |
| Operating Force | 11.8Nm | |
| Conduit Entry | M12 | |
| Mechanical Life | 10000000Cycles | |
| Mounting Orientation | Top | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
IP Rating IP68 | ||
Contact Configuration SPDT | ||
Housing Material Die Cast Zinc | ||
Contact Type Snap Action | ||
Terminal Type Cable | ||
Switching Current 6A | ||
Series SSCE | ||
Switching AC Voltage 600V ac | ||
Switching DC Voltage 250V dc | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 90°C | ||
Length 54mm | ||
Width 40mm | ||
Standards/Approvals CE, CSA, UL | ||
Depth 16mm | ||
Hazardous Area Certification NO | ||
Operating Force 11.8Nm | ||
Conduit Entry M12 | ||
Mechanical Life 10000000Cycles | ||
Mounting Orientation Top | ||
- Pays d'origine :
- GB
Honeywell SSCE Series Limit Switch, IP68, Die Cast Zinc Housing - SSCEB31B
This limit switch is a Compact electromechanical device designed to detect physical movement and provide a discrete electrical output in industrial control systems. It features a top-mounted plunger actuator housed in a die-cast zinc enclosure with ingress protection that permits use in wet or dusty environments. The switch is suited to monitoring linear motion and end-of-travel positions where a robust, sealed sensor is required.
Features and Benefits:
• SPDT snap-action contact for clear single-pole switching performance
• Rated for 600V AC switching to handle high-voltage circuits
• Switching current capability of 6A enabling moderate-load control
• IP68 enclosure for long-term protection against dust and immersion
• Mechanical endurance of 10,000,000 cycles for extended service life
• Operating range from -40°C to 90°C for wide temperature tolerance
• Rated for 600V AC switching to handle high-voltage circuits
• Switching current capability of 6A enabling moderate-load control
• IP68 enclosure for long-term protection against dust and immersion
• Mechanical endurance of 10,000,000 cycles for extended service life
• Operating range from -40°C to 90°C for wide temperature tolerance
Applications
• Suitable for position detection on automated conveyors
• Ideal for actuation feedback in industrial valves and dampers
• Used with motor drives as travel end-stop sensing
• Can be used for safety interlocks in outdoor control cabinets
• Used for machine tool limit detection in harsh environments
• Ideal for actuation feedback in industrial valves and dampers
• Used with motor drives as travel end-stop sensing
• Can be used for safety interlocks in outdoor control cabinets
• Used for machine tool limit detection in harsh environments
How is the electrical connection provided?
A cable Terminal is fitted to the unit, allowing direct wiring without separate Terminal blocks.
What type of actuator motion does it respond to?
The device uses a plunger-style actuator that responds to linear contact forces applied axially to the top-mounted plunger.
Which approvals verify suitability for regulated installations?
It holds CE, CSA and UL recognitions indicating conformity with multiple regional standards.
What material contributes to its impact resistance?
The enclosure is formed from die-cast zinc, providing structural durability and shielding for internal components.
How is mounting orientation handled for installation?
It is designed for TOP mounting, allowing installers to position the actuator above the switch body for direct engagement.
Approvals
UL, CSA.
Liens connexes
- Honeywell SSCE Series Plunger Limit Switch IP68 600 V ac, 6 A
- Honeywell Plunger Limit Switch IP67, Die Cast Zinc Housing
- Honeywell SSCE Series Roller Lever Limit Switch IP68 600 V ac, 6 A
- Honeywell BZE6 Series Plunger Limit Switch IP40, Die Cast Zinc Housing
- Honeywell BZE6 Series Plunger Limit Switch IP66, Die Cast Zinc Housing
- Honeywell SL1 Series Roller Plunger Limit Switch IP67, Die Cast Zinc Housing
- Honeywell HDLS Series Plunger Limit Switch IP65 IP67, Die Cast Zinc Housing
- Honeywell Plunger Limit Switch IP66 IP68, Die Cast Zinc Housing