Honeywell GSS Series Plunger Limit Switch, SPST, IP67, Metal Housing, 600V ac, 6A

N° de stock RS:: 258-8091
Numéro d'article Distrelec:: 301-38-780
Référence fabricant:: GSAC01C
Fabricant:: Honeywell

Honeywell GSS Series Plunger Limit Switch, SPST, IP67, Metal Housing, 600V ac, 6A

Sous-total (1 unité)*

259,92 €

(TVA exclue)

314,50 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

25 unité(s) expédiée(s) à partir du 29 juin 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	259,92 €

*Prix donné à titre indicatif

N° de stock RS:: 258-8091
Numéro d'article Distrelec:: 301-38-780
Référence fabricant:: GSAC01C
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	SPST
	IP Rating	IP67
	Housing Material	Metal
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GSS
	Switching DC Voltage	250V dc
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	85°C
	Width	42mm
	Standards/Approvals	BG, CE, CSA, UL
	Length	141mm
	Depth	42mm
	Hazardous Area Certification	No
	Operating Force	9.7N
	Mechanical Life	15000000Cycles
	Conduit Entry	M20 x 1.5

	Sélectionner tout
	Marque Honeywell
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration SPST
	IP Rating IP67
	Housing Material Metal
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GSS
	Switching DC Voltage 250V dc
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 85°C
	Width 42mm
	Standards/Approvals BG, CE, CSA, UL
	Length 141mm
	Depth 42mm
	Hazardous Area Certification No
	Operating Force 9.7N
	Mechanical Life 15000000Cycles
	Conduit Entry M20 x 1.5

Pays d'origine :: GB

Honeywell GSS Series Limit Switch, IP67, 9.7N Operating Force - GSAC01C

This limit switch is a plunger-actuated device designed for position detection and control in industrial systems. Housed in a metal enclosure with ingress protection, it operates across a wide ambient temperature range and interfaces via threaded conduit entry for integration into control installations.

Features and Benefits:

• Snap-action contacts provide Rapid state change for precise control
• SPST configuration simplifies Basic on/off signalling requirements
• Screw terminals enable secure wiring connections for maintenance ease
• Rated switching at 600V AC supports high-voltage control circuits
• Mechanical endurance of 15,000,000 cycles delivers long service intervals
• Operating force of 9.7 N ensures consistent actuation responsiveness

Applications

• Suitable for end-of-travel sensing on automated conveyors
• Ideal for position feedback on industrial presses and lifts
• Used with motor starters in factory control panels
• Can be used for safety interlocks on machine guards

What electrical load capabilities can I expect when switching DC circuits?

The switch is rated to switch 250V DC at up to 6 A, permitting use with moderate DC control loads and relay coils within that envelope.

How does the unit cope with harsh environmental exposure?

The metal enclosure carries an IP67 rating, protecting internal components from dust ingress and temporary immersion in water.

What connection format is provided for conduit and cable entry?

A threaded conduit entry of M20x1.5 is supplied for standard industrial conduit fittings and glands.

What temperature extremes can the switch reliably operate within?

It is specified to function between -25°C and 85°C, allowing use in cold stores and warm industrial spaces.

What approvals support compliance with industrial safety and performance standards?

It holds BG, CE, CSA and UL approvals relevant to electrical and safety requirements.